Publications

Director's order [Allowance - out of province workplace first aid training]

Description

An Occupational Health and Safety (OHS) allowance has been issued that recognizes out of province first aid certificates for workplace first aid training courses recognized by another Canadian... More ≫

Description

An Occupational Health and Safety (OHS) allowance has been issued that recognizes out of province first aid certificates for workplace first aid training courses recognized by another Canadian province or territory, which comply with CSA Standard Z1210-17, First aid training for the workplace - Curriculum and quality management for training agencies. Out of province first aid certificates covered by the allowance will be considered as demonstrating proof of approved first aid training until the certificate expiry date. Work site parties have the flexibility to follow the original first aid course requirements in the OHS Code or to follow the allowance.

Tags

Director Inter-jurisdictional Recognition [CSA-approved respiratory protective equipment (respirators)]

Description

Inter-jurisdictional Recognitions (IJRs) provide flexibility by recognizing standards adopted in different Canadian jurisdictions. These may be issued where there is an agreement between... More ≫

Description

Inter-jurisdictional Recognitions (IJRs) provide flexibility by recognizing standards adopted in different Canadian jurisdictions. These may be issued where there is an agreement between different jurisdictions, where recognizing another jurisdiction’s standard appropriately protects the health and safety of workers in Alberta while also supporting inter-provincial trade and labor mobility. Section 246 of the OHS Code outlines which respiratory protective equipment is allowed to be used at work sites in Alberta. An IJR has been issued that expands what is allowed to be used, which recognizes respiratory protective equipment approved by the Canadian Standards Association (CSA).

Tags

Director approval [OHS approval to permit an alternate method to adjust the occupational exposure limit for crystalline silica for work shifts longer than eight hours]

Description

An Occupational Health and Safety (OHS) approval has been issued for Section 18(3) of the OHS Code, to permit an alternate method to adjust the occupational exposure limit (OEL) for respirable... More ≫

Description

An Occupational Health and Safety (OHS) approval has been issued for Section 18(3) of the OHS Code, to permit an alternate method to adjust the occupational exposure limit (OEL) for respirable crystalline silica for work shifts longer than eight hours. This approval enables weekly work schedules to be considered when determining whether the OEL for respirable crystalline silica needs to be adjusted. Work site parties have the flexibility to follow the original rule in the OHS Code (where applicable) or to follow the approval.

Tags

Director Order [Effective March 31, 2023, revoking various allowances, approvals and interjurisdictional recognitions as these are no longer needed due to an OHS Code update]

Description

Revokes several allowances, approvals and interjurisdictional recognitions, effective March 31, 2023, as they are no longer needed due to an OHS Code update. This include: interjurisdictional... More ≫

Description

Revokes several allowances, approvals and interjurisdictional recognitions, effective March 31, 2023, as they are no longer needed due to an OHS Code update. This include: interjurisdictional recognition related to personal protective equipment and first aid kits; interjurisdictional recognition related to fall protection; approval related to rubber-tired self-propelled machines; and allowance related to confined space remote monitoring systems.

Tags

Director order [OHS allowance for demolition of structurally compromised buildings without first removing asbestos]

Description

An occupational health and safety (OHS) allowance allows a work site party to vary from specific provisions of the OHS Code. A work site will have the flexibility to either follow the original... More ≫

Description

An occupational health and safety (OHS) allowance allows a work site party to vary from specific provisions of the OHS Code. A work site will have the flexibility to either follow the original rule in the OHS Code or follow the allowance. An allowance has been issued to allow demolition of a building without first removing materials with the potential to release asbestos fibres so long as the set of terms and conditions in the allowance is followed. The allowance applies in situations where a professional engineer has certified that the structural integrity of a building is or may become compromised due to abatement activities such that it would create a hazard to workers.

Tags

Director Order [alignment of requirements with the National Health and Safety Reconciliation Agreement (personal protective equipment and first aid kits)]

Description

With this order, standards listed in the attached schedule for the following equipment and personal protective equipment meet compliance requirements on work sites regulated by the Government of... More ≫

Description

With this order, standards listed in the attached schedule for the following equipment and personal protective equipment meet compliance requirements on work sites regulated by the Government of Alberta: • Personal protective equipment for hearing protection, eye protection, footwear, protective headwear, personal flotation devices and lifejackets and first aid equipment. • First aid kit contents. Inter-jurisdictional Recognitions provide flexibility by recognizing standards adopted in different Canadian jurisdictions. These may be issued where another jurisdiction’s standard appropriately protects the health and safety of workers in Alberta while also supporting interprovincial trade and labour mobility.

Tags

Director order [OHS allowance to permit use of confined space remote monitoring systems]

Description

The Occupational Health and Safety (OHS) Code places an obligation on employers to have a tending worker physically located outside a confined space, at or near the entrance, who is not to leave... More ≫

Description

The Occupational Health and Safety (OHS) Code places an obligation on employers to have a tending worker physically located outside a confined space, at or near the entrance, who is not to leave the area until all workers have left the confined space or another tending worker is in place. Confined Space Remote Monitoring System (CSRMS) technology is an engineered system that allows workers inside a confined space to be monitored remotely; meaning a tending worker does not have to be physically located at or near the entrance to a confined space. This allowance is issued for subsections 56(3) and 56(5) of the OHS Code, permitting work sites to use CSRMS technology. A work site will have the flexibility to either follow the original rule in the OHS Code or follow this allowance.

Tags

Director Order [alignment of requirements with Pan Canadian Occupational Health and Safety Reconciliation Agreement (fall protection)]

Description

With this order, standards listed in the attached schedule for the following equipment and personal protective equipment meet compliance requirements on work sites regulated by the Government of... More ≫

Description

With this order, standards listed in the attached schedule for the following equipment and personal protective equipment meet compliance requirements on work sites regulated by the Government of Alberta: • Personal protective equipment for full body harness, lanyard, shock absorber, connectors, carabiners and snap hooks, fall arresters, self-retracting devices, and life safety rope. • Inter-jurisdictional Recognitions provide flexibility by recognizing standards adopted in different Canadian jurisdictions. These may be issued where another jurisdiction’s standard appropriately protects the health and safety of workers in Alberta while also supporting interprovincial trade and labour mobility.

Tags

Ministerial Order 2022-01 [Labour and Immigration]

Description

Grants a variance respecting section 12(1) of the Employment Standards Code to the Banff and Lake Louise Hospitality Association.

Tags

Director order [OHS allowance for OHS Code 391.1]

Description

Director’s order that allows work site parties to vary from one of the OHS Code 391.1 requirements pertaining to sharing of work site investigation reports with parties other than an OHS officer.

Tags