Open Data

Frost Free Period 1971-2000

Description

The data represents the frost-free period in Alberta over the 30-year period from 1971 to 2000. A 30-year period is used to describe the present climate since it is enough time to filter out... More ≫

Description

The data represents the frost-free period in Alberta over the 30-year period from 1971 to 2000. A 30-year period is used to describe the present climate since it is enough time to filter out short-term fluctuations but is not dominated by any long-term trend in the climate. The frost-free period is the number of days between the last date of 00C in the spring and the first date of 00C in the fall. Frost free periods in Alberta vary from 125 days in the south to less than 85 days in higher elevation, non-agricultural areas.The frost-free period is presented as days above 0&deg.C in the following classes: less than 85, 85 to 95, 95 to 105, 105 to 115, 115 to 125 and greater than 125. This resource was created using ArcGIS.

Tags

Aquifer Vulnerability Index

Description

The Aquifer Vulnerability Index (AVI) is a method of assessing the vulnerability of aquifers to surface contaminants in Alberta. An aquifer is a geological formation that is permeable enough to... More ≫

Description

The Aquifer Vulnerability Index (AVI) is a method of assessing the vulnerability of aquifers to surface contaminants in Alberta. An aquifer is a geological formation that is permeable enough to transmit sufficient quantities of water to possible to support the development of water wells. In the assessment of aquifer vulnerability to potential contamination, the depth to the aquifer and the types of geological materials above them are considered. For example, aquifers closer to the surface overlain with pervious surface materials are more vulnerable to contaminants, as compared to aquifers found deeper and covered with a thick layer of impervious material. The AVI ratings indicate the potential of surficial materials to transmit water withy contaminants to the aquifer over a period of time. This data was created in 2002 using ArcGIS.

Tags

Annual Total Precipitation 1971-2000

Description

The data represents the annual total precipitation in Alberta over the 30-year period from 1971 to 2000. A 30-year period is used to describe the present climate since it is enough time to filter... More ≫

Description

The data represents the annual total precipitation in Alberta over the 30-year period from 1971 to 2000. A 30-year period is used to describe the present climate since it is enough time to filter our short-term fluctuations but is not dominated by any long-term trend in the climate. Annual total precipitation refers to rain, snow and other forms of moisture such as hail. Annual precipitation is greatest in the mountains and decreases at lower elevations. In the agricultural areas of the province, 50 to60 percent of annual precipitation generally occurs during the growing season, mostly as rain.Precipitation in any month can be extremely variable with the variability of precipitation being greater in southern Alberta than in the Peace River Region and central Alberta. However, long-term (30-year) data provides a reliable indication of what to expect in any given location. Climate information is used as a long-term planning tool, in selecting a location for a farm or planning a...

Tags

Chemical Expense Index 2001

Description

The data represents the relative expense of farm chemicals (herbicides, insecticides and fungicides) in the agricultural area of Alberta. It is an estimate of the degree to which crop production... More ≫

Description

The data represents the relative expense of farm chemicals (herbicides, insecticides and fungicides) in the agricultural area of Alberta. It is an estimate of the degree to which crop production agriculture may contribute to surface or groundwater contamination.Agriculture production that makes greater use of herbicides, insecticides and pesticides in generally considered more intensive. Presenting the relative farm chemical expenses by SLC polygons reveals where the most intensive agricultural production in the province occurs. Chemical use is part of an equation to determine a measure of surface water quality risk. If an area is known to have certain risk factors that would affect not only surface, but groundwater quality as well, a higher chemical expense index ranking in that same area may be of concern. Where risks of surface or groundwater contamination exist, environmental farm planning can help to minimize them.

Tags

Ground Water Quality Risk

Description

This map displays an assessment of groundwater quality risk for the agricultural area of Alberta. Agricultural activities that may have an impact on groundwater quality include livestock, crop... More ≫

Description

This map displays an assessment of groundwater quality risk for the agricultural area of Alberta. Agricultural activities that may have an impact on groundwater quality include livestock, crop production and agrochemical use. These activities along with the physical characteristics represented by aquifer vulnerability and available moisture were combined to produce this map. The classes shown on the map were ranked from 0 (lowest risk) to 1 (highest risk). This resource was created in 2005 using ArcGIS.

Tags

Soil Erosion Risk

Description

This map displays an assessment of soil erosion risk for the agricultural area of Alberta. Loss of protective residue cover through cultivation will increase the potential risk of soil erosion.... More ≫

Description

This map displays an assessment of soil erosion risk for the agricultural area of Alberta. Loss of protective residue cover through cultivation will increase the potential risk of soil erosion. The vulnerability of the soil to erosion combined with the intensity of cultivation determines the degree to which the soil may be at risk. The classes shown on the map were ranked from 0 (lowest risk) to 1 (highest risk). This resource was created in 2002 using ArcGIS.

Tags

Cultivation Intensity Index 2001

Description

The data represents the relative cultivation intensity in the agricultural area of Alberta. Cultivation intensity refers to the frequency of cultivation associated with the following management... More ≫

Description

The data represents the relative cultivation intensity in the agricultural area of Alberta. Cultivation intensity refers to the frequency of cultivation associated with the following management systems: no till, conventional tillage and summerfallow. It is an estimate of the degree to which cultivation contributes to wind and water erosion. The classes shown on the map are ranked between 0 (lowest) and 1 (highest).This map was created in 2002 using ArcGIS.

Tags

Areal Extent of Wetlands

Description

The data represents the density of wetland habitat in the agricultural region of Alberta in 2002. Wetlands are depressional areas that are wet for a long enough period that the plant and animals... More ≫

Description

The data represents the density of wetland habitat in the agricultural region of Alberta in 2002. Wetlands are depressional areas that are wet for a long enough period that the plant and animals living in them are adapted to, and often dependent on, living in wet conditions for at least part of their life cycle. In drier areas of the province, wetlands tend to be more intermittent, while in wetter areas, wetlands tend to be more persistent. Topography also affects the occurrence of wetlands. Hummocky landscapes allow for pooling of water in depressions, while landscapes with longer slopes (e.g. the foothills) generally have better defined surface drainage patterns. A wetland in influenced by the interaction between the wet area, the wetland margin and upland area.Wetlands provide important habitat for waterfowl and many other types of wildlife. Wetlands reduce the impact of flooding, provide erosion control, purify water by removing sediment and nutrients, and contribute to...

Tags

Solonetzic Soils

Description

This map displays the distribution of Solonetzic soils in the agricultural region of Alberta. Solonetzic soils have developed on saline parent material that is high in sodium and have a... More ≫

Description

This map displays the distribution of Solonetzic soils in the agricultural region of Alberta. Solonetzic soils have developed on saline parent material that is high in sodium and have a characteristic hardpan layer that has formed in the subsoil. This hardpan is very hard when dry and has low permeability when wet. This results in restricted root and water penetration that may limit the productivity of these soils. Solonetzic soils occur in association with Chernozemic soils and, to a lesser extent, with Luvisolic soils.The Agricultural Region of Alberta Soil Inventory Database (AGRASID) soil landscape polygons that contained soils belonging to the Solonetzic Order were identified, and the areal extent of these soils was represented as a percentage of the total area using the following classes: greater than 30, 10 to 30 and less than 10. This resource was created in 2002 using ArcGIS.

Tags

Organic Soils

Description

This map displays the distribution of organic soils in the agricultural region of Alberta. Organic soils consist of layers of material with greater than 30 percent organic matter and a total... More ≫

Description

This map displays the distribution of organic soils in the agricultural region of Alberta. Organic soils consist of layers of material with greater than 30 percent organic matter and a total thickness of greater than 40 cm. Organic soils are generally saturated with water for most of the year unless drained. Saturation inhibits decomposition and encourages continued accumulation of organic material. Drainage of these soils can result in a rapid increase in decomposition and a reduction in the thickness of the organic material. This resource was created in 2002 using ArcGIS.

Tags