All Resources
Search a listing of Government of Alberta open datasets and publications.
Views: 0
Updated
July 27, 2023
Description
This design bulletin offers supplemental guidance regarding new roundabouts on designated Economic and High Load Corridor highways, further to Design Bulletin 68.
Tags
Views: 2058
Updated
March 31, 2023
Description
The purpose of this document is to supply supplemental guidelines to the Alberta Highway Geometric Design Guide 1999 edition for the urban portions of the provincial highway network. This document...
Tags
Views: 46577
Updated
March 31, 2023
Description
The purpose of this guide is to promote uniformity for highway design in Alberta and to encourage the provision of safe and efficient roads for the well-being of the travelling public and society...
Tags
Views: 11
Updated
March 31, 2023
Description
This record contains archived and superseded sections of the Highway Geometric Design Guide, which are retained for informational purposes only. TO VIEW THE FULL AND CURRENT VERSION of the guide,...
Tags
Views: 2548
Updated
August 8, 2022
Description
This Bulletin is issued to inform practitioners of the department’s guidelines on the use of High Tension Cable Barrier (HTCB) installed in the median and on the roadside (or right hand side in...
Tags
Views: 2279
Updated
February 1, 2022
Description
This design bulletin outlined a new highway service classification system adopted by Alberta Transportation as a result of a study completed by the department to review the previous classification...
Tags
Views: 883
Updated
October 21, 2019
Description
This bulletin is being issued as a revision and/or update to Alberta Transportation's roadside design guide, November 2007.
Tags
Views: 1317
Updated
March 19, 2018
Description
This Bulletin has been developed in order to achieve consistent practices for installation of rumble strips. This opportunity has also been used to fine-tune the placement criteria to improve the...
Tags
Views: 366
Updated
September 1, 2017
Description
The intent of Design Standards/Practice Exceptions is to determine, justify and document that good engineering judgment is being exercised.
Tags
Views: 2603
Updated
June 28, 2016
Description
This Bulletin supersedes Bulletin 31 concerning the policy and guidelines for the use of roundabouts on roadways under Alberta Transportation’s direction and control.