All Resources

Quantification protocol for biofuel production and usage. Version 1

Description

Written for the biofuel production facility or project developer, this protocol quantifies the emission reductions from the avoidance of fossil fuel consumption when the fossil fuel is replaced by... More ≫

Description

Written for the biofuel production facility or project developer, this protocol quantifies the emission reductions from the avoidance of fossil fuel consumption when the fossil fuel is replaced by biofuels on an equivalent energy potential basis. The protocol also includes reductions in greenhouse gas (GHG) emissions due to any heat/power production and electricity generation related to the process, and from the avoidance of landfilling any materials which may be diverted for conversion to biofuel. The protocol is not intended to be prescriptive, but instead serve as a generic “recipe” for biofuel facility owners and operators to follow in order to meet measurement, monitoring and GHG quantification requirements.

Tags

Quantification protocol for fuel switching in mobile equipment. Version 1.0

Description

This quantification protocol describes the process for quantifying greenhouse gas emission reductions resulting from converting mobile fleets to lower-greenhouse gas intensity fuels while... More ≫

Description

This quantification protocol describes the process for quantifying greenhouse gas emission reductions resulting from converting mobile fleets to lower-greenhouse gas intensity fuels while maintaining an equal or greater level of service.

Tags

Technical guidance for offset project developers. Version 4.0

Description

The purpose of this doucment is to assist offset market participants (protocol developers) wishing to develop quantification protocols for use in the Alberta offset system where the intended final... More ≫

Description

The purpose of this doucment is to assist offset market participants (protocol developers) wishing to develop quantification protocols for use in the Alberta offset system where the intended final purchaser of offset credits generated is a facility regulated under the Specified Gas Emitters Regulation. Alberta's offset market was initiated as a market instrument to support compliance under the Specified Gas Emitters Regulation. The Regulation requires all large, industrial facilities in Alberta emitting over 100,000 tonnes of carbon dioxide equivalent per year to reduce their emissions intensity by 12 per cent per year from their government approved baseline emission intensity.

Tags

Quantification protocol for direct reductions in greenhouse gas emissions arising from changes in forest harvesting practices. Version 1.0

Description

This quantification protocol describes the process for quantifying annual greenhouse gas emission reductions/removals arising from a change in forest harvesting practice from full tree harvesting... More ≫

Description

This quantification protocol describes the process for quantifying annual greenhouse gas emission reductions/removals arising from a change in forest harvesting practice from full tree harvesting with tree length hauling and chipping in a wood room at the mill to chipping using portable chippers.

Tags

Quantification protocol for reducing the age at harvest of beef cattle. Version 2.0

Description

This protocol quantifies decreases in greenhouse gas emissions associated with the raising of beef cattle by reducing the number of days required to get a feeder calf from birth to harvest. This... More ≫

Description

This protocol quantifies decreases in greenhouse gas emissions associated with the raising of beef cattle by reducing the number of days required to get a feeder calf from birth to harvest. This applies to youthful cattle, or those cattle under 24 months of age. In this context, feeder cattle that spend less time in backgrounding lots, on pasture and in the feedlot result in decreased greenhouse gas emissions. Withdrawn as of March 31, 2020.

Tags

Technical guidance for completing specified gas compliance reports. Version 4.0

Description

The purpose of this document is to assist facilities regulated under the Specified Gas Emitters Regulation in completing annual compliance reports. It also provides information on the compliance... More ≫

Description

The purpose of this document is to assist facilities regulated under the Specified Gas Emitters Regulation in completing annual compliance reports. It also provides information on the compliance options available for facilities that are not able to meet their emissions reduction target through facility level improvements.

Tags

Technical guidance for offset protocol developers. Version 1.0

Description

The purpose of this document is to assist offset market participants (protocol developers) wishing to develop quantification protocols for use in the Alberta offset system where the intended final... More ≫

Description

The purpose of this document is to assist offset market participants (protocol developers) wishing to develop quantification protocols for use in the Alberta offset system where the intended final purchaser of offset credits generated is a facility regulated under the Specified Gas Emitters Regulation. Alberta's offset market was initiated as a market instrument to support compliance under the Specified Gas Emitters Regulation. The Regulation requires all large, industrial facilities in Alberta emitting over 100,000 tonnes of carbon dioxide equivalent per year to reduce their emissions intensity by 12 per cent per year from their government approved baseline emission intensity.

Tags

Technical guidance for offset project developers. Version 2.0

Description

The purpose of this document is to assist offset market participants in implementing offset projects for use in the Alberta offset system where the intended final purchaser is a facility regulated... More ≫

Description

The purpose of this document is to assist offset market participants in implementing offset projects for use in the Alberta offset system where the intended final purchaser is a facility regulated under the Specified Gas Emitters Regulation.

Tags

Quantification protocol for energy efficiency in commercial and institutional buildings. Version 1.0

Description

This document establishes approved methodology for quantifying greenhouse gas emission reductions from energy efficiency measures implemented in commercial and institutional buildings. This... More ≫

Description

This document establishes approved methodology for quantifying greenhouse gas emission reductions from energy efficiency measures implemented in commercial and institutional buildings. This quantification protocol can be used by project developers to quantify greenhouse gas emission reductions resulting from the implementation of energy conservation measures resulting from changes in management practices and/or actual building improvements in new and retrofit projects. Emissions reductions are calculated as a difference in energy use in the project condition compared to the baseline. New builds are required to establish a baseline based on applicable building codes and a project condition that incorporates changes beyond these minimum standards. Retrofit projects are required to establish a baseline based on a greater of one full calendar year or one full operating cycle of data for actual building operations. Any changes in baseline conditions such as weather or building occupancy...

Tags

Quantification protocol for engine fuel management and vent gas capture projects. Version 1.0

Description

This protocol quantifies greenhouse gas (GHG) reductions that result from two related activities: the improvement in the fuel efficiency of natural gas combustion engines, and the capture of gases... More ≫

Description

This protocol quantifies greenhouse gas (GHG) reductions that result from two related activities: the improvement in the fuel efficiency of natural gas combustion engines, and the capture of gases (primarily methane) normally vented to the atmosphere. The quantification approaches for measuring GHG reductions for both components are based on measurement and monitoring and thus provide a high level of accuracy. The protocol is written for those familiar with the operation of natural gas combustion engines and control systems that manage the fuel consumption for these engines.

Tags