All Resources

Securing pipe and other cargo on vehicles

Description

The Occupational Health and Safety Code places obligations on both the employer and worker in workplace situations where there is a potential danger because of equipment or materials becoming... More ≫

Description

The Occupational Health and Safety Code places obligations on both the employer and worker in workplace situations where there is a potential danger because of equipment or materials becoming dislodged or moving. This safety bulletin looks at the responsibilities of each and presents recommended practices for securing cargo on vehicles.

Tags

You want me to lift how much?

Description

There is no specific law regarding the maximum weight a worker can lift. Restricting loads to a particular weight does not guarantee safety, and it is difficult to come up with a single safe... More ≫

Description

There is no specific law regarding the maximum weight a worker can lift. Restricting loads to a particular weight does not guarantee safety, and it is difficult to come up with a single safe weight limit for lifting. This bulletin looks at the use of online lifting calculators to determine appropriate weight limits, and points to consider before using these.

Tags

West Nile Virus and workers

Description

This bulletin presents workers the symptoms of West Nile virus, the workers at risk and the control measures for workers.

Tags

Alberta's Occupational Health and Safety Code : an explanation of the "Working Alone" requirements

Description

The purpose of this publication is to explain the requirements of Part 28 of the OHS Code, in plain, easy-to-understand language. Each of the “rules” of the OHS Code is presented, followed by... More ≫

Description

The purpose of this publication is to explain the requirements of Part 28 of the OHS Code, in plain, easy-to-understand language. Each of the “rules” of the OHS Code is presented, followed by information that helps clarify the intent or application of the requirement. This publication accompanies a handbook of best practices intended to help employers meet their obligations.

Tags

Supplier material safety data sheets at oil and gas lease sites

Description

Many products used at oil and gas lease sites may be hazardous to workers’ health and safety. Employers must have specific information available on-site for any of these products that are... More ≫

Description

Many products used at oil and gas lease sites may be hazardous to workers’ health and safety. Employers must have specific information available on-site for any of these products that are classified as “controlled products” under the Workplace Hazardous Materials Information System (WHMIS). This two-page fact sheet gives a brief overview of WHMIS and Material Safety Data Sheets as they apply to oil and gas lease sites.

Tags

Putting the “I” in ergonomics

Description

Looks at ergonomic issues in the workplace and the need to consider personal as well as work-related actions that could be considered when looking for solutions.

Tags

Guarding of commercial dough and food preparation mixers

Description

Presents information specific to the guarding of commercial dough and food preparation mixers to prevent unintentional worker contact with rotating shafts and attachments.

Tags

Servicing tires safely

Description

Discusses requirements of the Occupational Health and Safety Code that apply to employers and workers involved in tire servicing. Employers must ensure that only competent workers – workers who... More ≫

Description

Discusses requirements of the Occupational Health and Safety Code that apply to employers and workers involved in tire servicing. Employers must ensure that only competent workers – workers who are appropriately trained, qualified and with sufficient experience to do the work safely – are allowed to service, inspect, disassemble and reassemble a tire or tire and wheel assembly.

Tags

All shook up : understanding vibration

Description

Many workers are exposed to vibration daily while using vibrating equipment or machinery. Workers operating hand-held equipment, such as chain saw or jackhammer, are exposed to hand-arm vibration.... More ≫

Description

Many workers are exposed to vibration daily while using vibrating equipment or machinery. Workers operating hand-held equipment, such as chain saw or jackhammer, are exposed to hand-arm vibration. Workers sitting or standing on a vibrating floor or seat are exposed to whole-body vibration because the vibration affects almost their entire body. The risk of injury from exposure to either type of vibration depends on the intensity and frequency of the vibration, the duration of exposure (usually measured in years) and the part(s) of the body affected.

Tags

Ten questions to ask your employer

Description

This bulletin presents 10 questions employees can ask to help determine a potential employer’s commitment to safety in the workplace.

Tags