All Resources

Standard operating procedure for the Ecochem PAS 2000 analyzer

Description

The Ecochem PAS 2000 analyzer is used to obtain continuous real time data for particle-bound PAH for the purpose of air quality assessment or air quality trend reporting. This procedure is... More ≫

Description

The Ecochem PAS 2000 analyzer is used to obtain continuous real time data for particle-bound PAH for the purpose of air quality assessment or air quality trend reporting. This procedure is specific to the PAS2000 and should not be applied to other PAH analyzers.

Tags

Standard operating procedure for zero-air generators

Description

This procedure describes the role of Zero-Air Generators in supplying pure, dry air as a source of calibration standard. This Standard Operating Procedure details two alternate Zero-Air sources:... More ≫

Description

This procedure describes the role of Zero-Air Generators in supplying pure, dry air as a source of calibration standard. This Standard Operating Procedure details two alternate Zero-Air sources: Perma Pure Inc.’s Zero-Air Generator (ZAG), and Advanced Pollution Instrumentation’s (API) Zero-Air Module.

Tags

Standard operating procedure for flow measurement using a primary flow meter

Description

This procedure describes the operation and maintenance of the BIOS DC-2 flow meter. This device is used to measure air flow rate either from vacuum or pressure flow sources.

Tags

Standard operating procedure for air dryers

Description

The Puregas and Bendix model air dryers are designed to effectively remove moisture or other unwanted components from a compressed air stream. They separate the various components using Pressure... More ≫

Description

The Puregas and Bendix model air dryers are designed to effectively remove moisture or other unwanted components from a compressed air stream. They separate the various components using Pressure Swing Absorption (PSA) technology. This SOP will explain the principle and details of that operation.

Tags

Standard operating procedure for the measurement of wind speed and direction using ultrasonic systems

Description

This procedure describes the operation and maintenance of an ultrasonic wind speed and direction sensor assembly. Data collected from these sensors is typically used for air quality assessments,... More ≫

Description

This procedure describes the operation and maintenance of an ultrasonic wind speed and direction sensor assembly. Data collected from these sensors is typically used for air quality assessments, meteorological and climate trend reporting and inclusion in the provincial and national meteorological databases.

Tags

Standard operating procedure for measurement of ozone in ambient air by ultraviolet (UV) photometry

Description

To obtain timely data for the purpose of air quality assessment, air quality trend reporting, air quality index reporting and to meet the requirements for inclusion of the data in provincial and... More ≫

Description

To obtain timely data for the purpose of air quality assessment, air quality trend reporting, air quality index reporting and to meet the requirements for inclusion of the data in provincial and national air quality databases, a continuous method of analyzing Ozone concentration in ambient air samples is used. This method is capable of measurement updates at a rate of once every five minutes or faster. Readings from instruments of this method enables the calculation of hourly averaged concentration of ozone. Commercially available ozone analyzers are used in the method.

Tags

Standard operating procedure for high-volume polyurethane foam sampler

Description

For the purpose of collection of ambient air samples for determination of polyaromatic hydrocarbons (PAH), Polychlorinated biphenols (PCB’s), dioxins and furans, and pesticides a high volume... More ≫

Description

For the purpose of collection of ambient air samples for determination of polyaromatic hydrocarbons (PAH), Polychlorinated biphenols (PCB’s), dioxins and furans, and pesticides a high volume sampler is used for this method with a polyurethane foam (PUF) cartridge. Typically samples are collected on the National Air Pollution Surveillance (NAPS) schedule, every six days. Results will not be immediate but rather in the form of laboratory results, days or even weeks later. PUF samplers are named as such because they use a plug of polyurethane foam to trap the target compounds that exist in the vapour phase. A particulate filter is also used to collect the sample in the particulate phase and trap dust and prevent deterioration of the foam.

Tags

Standard operating procedure for measurement of SO2 by SO2 fluorescence

Description

To obtain timely data for the purpose of air quality assessment, air quality trend reporting, air quality index reporting and to meet the requirements for inclusion of the data in provincial and... More ≫

Description

To obtain timely data for the purpose of air quality assessment, air quality trend reporting, air quality index reporting and to meet the requirements for inclusion of the data in provincial and national air quality databases, a continuous method of analyzing Sulphur Dioxide (SO2) concentrations in ambient air is used. This method is capable of measurement updates at a rate of once every five minutes or faster. Readings from instruments of this method enables the calculation of hourly averaged concentrations of SO2. Commercially available SO2 analyzers are used in the method.

Tags

Standard operating procedure for MAML systems

Description

This SOP is intended to provide instruction on operation of the Mobile Air Monitoring Laboratory as it relates to air quality monitoring operations and the data generated during those operations.

Tags

Standard operating procedure for measurement of ethylene (C2H4) in ambient air by reduced gas detection (RGD)

Description

To obtain timely data for the purpose of air quality assessment, air quality trend reporting and to meet the requirements for inclusion of the data in provincial and national air quality... More ≫

Description

To obtain timely data for the purpose of air quality assessment, air quality trend reporting and to meet the requirements for inclusion of the data in provincial and national air quality databases, a continuous method of analyzing ethylene (C2H4) concentrations in ambient air is used. This method is capable of measurement updates at a rate of once every four minutes for calculations of an hourly average. Commercially available gas chromatography based reduced gas detection (RGD) analyzers are used in the method.

Tags