All Resources

83 - Historical Planimetric Maps

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series ... More ≫

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series base maps were initiated in 1949 and derived from aerial photographs taken during the years 1949 to 1952. These maps display: Alberta Township System (ATS) - hydrographic features - provincial highways - roads - pipelines - transmission lines - municipalities. These maps are not available as GIS-ready data. All available maps are provided in Adobe PDF and TIF format. To obtain the TIF format, please contact the distributor. Geo-referenced PNG files are also available for some maps, but some are roughly georeferenced with only a few control points. Please note that the coverage for the province is incomplete and it is not known if further coverage will be added. Some maps were also updated after their initial publication, please refer to the maps for the most current dates.

Tags

82 - Historical Planimetric Maps

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series ... More ≫

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series base maps were initiated in 1949 and derived from aerial photographs taken during the years 1949 to 1952. These maps display: Alberta Township System (ATS) - hydrographic features - provincial highways - roads - pipelines - transmission lines - municipalities. These maps are not available as GIS-ready data. All available maps are provided in Adobe PDF and TIF format. To obtain the TIF format, please contact the distributor. Geo-referenced PNG files are also available for some maps, but some are roughly georeferenced with only a few control points. Please note that the coverage for the province is incomplete and it is not known if further coverage will be added. Some maps were also updated after their initial publication, please refer to the maps for the most current dates.

Tags

73 - Historical Planimetric Maps

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series ... More ≫

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series base maps were initiated in 1949 and derived from aerial photographs taken during the years 1949 to 1952. These maps display: Alberta Township System (ATS) - hydrographic features - provincial highways - roads - pipelines - transmission lines - municipalities. These maps are not available as GIS-ready data. All available maps are provided in Adobe PDF and TIF format. To obtain the TIF format, please contact the distributor. Geo-referenced PNG files are also available for some maps, but some are roughly georeferenced with only a few control points. Please note that the coverage for the province is incomplete and it is not known if further coverage will be added. Some maps were also updated after their initial publication, please refer to the maps for the most current dates.

Tags

72 - Historical Planimetric Maps

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series ... More ≫

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series base maps were initiated in 1949 and derived from aerial photographs taken during the years 1949 to 1952. These maps display: Alberta Township System (ATS) - hydrographic features - provincial highways - roads - pipelines - transmission lines - municipalities. These maps are not available as GIS-ready data. All available maps are provided in Adobe PDF and TIF format. To obtain the TIF format, please contact the distributor. Geo-referenced PNG files are also available for most maps. Please note that the coverage for the province is incomplete and it is not known if further coverage will be added.

Tags

84 - Historical Planimetric Maps

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series ... More ≫

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series base maps were initiated in 1949 and derived from aerial photographs taken during the years 1949 to 1952. These maps display: Alberta Township System (ATS) - hydrographic features - provincial highways - roads - pipelines - transmission lines - municipalities. These maps are not available as GIS-ready data. All available maps are provided in Adobe PDF and TIF format. To obtain the TIF format, please contact the distributor. Geo-referenced PNG files are also available for some maps, but some are roughly georeferenced with only a few control points. Please note that the coverage for the province is incomplete and it is not known if further coverage will be added. Some maps were also updated after their initial publication, please refer to the maps for the most current dates.

Tags

74 - Historical Planimetric Maps

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series ... More ≫

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series base maps were initiated in 1949 and derived from aerial photographs taken during the years 1949 to 1952. These maps display: Alberta Township System (ATS) - hydrographic features - provincial highways - roads - pipelines - transmission lines - municipalities. These maps are not available as GIS-ready data. All available maps are provided in Adobe PDF and TIF format. To obtain the TIF format, please contact the distributor. Geo-referenced PNG files are also available for some maps, but some are roughly georeferenced with only a few control points. Please note that the coverage for the province is incomplete and it is not known if further coverage will be added. Some maps were also updated after their initial publication, please refer to the maps for the most current dates.

Tags

74 - Historical Forest Inventory - Phase 1 (Broad Scale) Maps

Description

The Phase 1 (Broad Scale) Forest Inventory was initiated in 1949 and completed by 1956. The Phase 1 (Broad Scale) Forest Inventory included all publicly owned forested lands in the province except ... More ≫

Description

The Phase 1 (Broad Scale) Forest Inventory was initiated in 1949 and completed by 1956. The Phase 1 (Broad Scale) Forest Inventory included all publicly owned forested lands in the province except Indian lands, national parks, and an area known as the Rocky Mountains Forest Reserve. The Phase 1 (Broad Scale) Forest Inventory was used to define lands suitable for agriculture, to determine timber harvest levels and plan forest protection and timber and industrial development. Through aerial photo interpretation, land was classified as productive, potentially productive, or non-productive. On productive forest land, homogeneous groups of trees were classified by 'cover types'. Cover types included crown density, height and tree species. Burned, harvested or cultivated land was identified as potentially productive. Non-productive lands included areas with organic soils, barren rock and lakes. No ages or site classes are associated with the polygons. The minimum polygon size was 65 ha....

Tags

84 - Historical Forest Inventory - Phase 1 (Broad Scale) Maps

Description

The Phase 1 (Broad Scale) Forest Inventory was initiated in 1949 and completed by 1956. The Phase 1 (Broad Scale) Forest Inventory included all publicly owned forested lands in the province except ... More ≫

Description

The Phase 1 (Broad Scale) Forest Inventory was initiated in 1949 and completed by 1956. The Phase 1 (Broad Scale) Forest Inventory included all publicly owned forested lands in the province except Indian lands, national parks, and an area known as the Rocky Mountains Forest Reserve. The Phase 1 (Broad Scale) Forest Inventory was used to define lands suitable for agriculture, to determine timber harvest levels and plan forest protection and timber and industrial development. Through aerial photo interpretation, land was classified as productive, potentially productive, or non-productive. On productive forest land, homogeneous groups of trees were classified by 'cover types'. Cover types included crown density, height and tree species. Burned, harvested or cultivated land was identified as potentially productive. Non-productive lands included areas with organic soils, barren rock and lakes. No ages or site classes are associated with the polygons. The minimum polygon size was 65 ha....

Tags

82 - Historical Forest Inventory - Phase 1 (Broad Scale) Maps

Description

The Phase 1 (Broad Scale) Forest Inventory was initiated in 1949 and completed by 1956. The Phase 1 (Broad Scale) Forest Inventory included all publicly owned forested lands in the province except ... More ≫

Description

The Phase 1 (Broad Scale) Forest Inventory was initiated in 1949 and completed by 1956. The Phase 1 (Broad Scale) Forest Inventory included all publicly owned forested lands in the province except Indian lands, national parks, and an area known as the Rocky Mountains Forest Reserve. The Phase 1 (Broad Scale) Forest Inventory was used to define lands suitable for agriculture, to determine timber harvest levels and plan forest protection and timber and industrial development. Through aerial photo interpretation, land was classified as productive, potentially productive, or non-productive. On productive forest land, homogeneous groups of trees were classified by 'cover types'. Cover types included crown density, height and tree species. Burned, harvested or cultivated land was identified as potentially productive. Non-productive lands included areas with organic soils, barren rock and lakes. No ages or site classes are associated with the polygons. The minimum polygon size was 65 ha....

Tags

83 - Historical Forest Inventory - Phase 1 (Broad Scale) Maps

Description

The Phase 1 (Broad Scale) Forest Inventory was initiated in 1949 and completed by 1956. The Phase 1 (Broad Scale) Forest Inventory included all publicly owned forested lands in the province except ... More ≫

Description

The Phase 1 (Broad Scale) Forest Inventory was initiated in 1949 and completed by 1956. The Phase 1 (Broad Scale) Forest Inventory included all publicly owned forested lands in the province except Indian lands, national parks, and an area known as the Rocky Mountains Forest Reserve. The Phase 1 (Broad Scale) Forest Inventory was used to define lands suitable for agriculture, to determine timber harvest levels and plan forest protection and timber and industrial development. Through aerial photo interpretation, land was classified as productive, potentially productive, or non-productive. On productive forest land, homogeneous groups of trees were classified by 'cover types'. Cover types included crown density, height and tree species. Burned, harvested or cultivated land was identified as potentially productive. Non-productive lands included areas with organic soils, barren rock and lakes. No ages or site classes are associated with the polygons. The minimum polygon size was 65 ha....

Tags