All Resources

Wabamun Lake Modelling Case Study - Chemical Analyses of Formation Waters (point features, comma separated text file) (NTS 83G)

Description

In November 2005, participants at the Workshop on Geological Storage of CO2 at Princeton University agreed on the need for a common test problem to assess various models to simulate the fate of... More ≫

Description

In November 2005, participants at the Workshop on Geological Storage of CO2 at Princeton University agreed on the need for a common test problem to assess various models to simulate the fate of CO2 injected into the subsurface. Alberta Geological Survey offered to make available the data for the Wabamun Lake area in Alberta, Canada, which were assembled to develop a comprehensive model for studying CO2 geological storage. The Wabamun Lake area, southwest of Edmonton in central Alberta, was selected as the test area because a variety of favourable conditions identified it as a potential site for future, large-scale CO2 injection. Several large, industrial CO2 point sources are in the area, resulting in short transportation distances of the captured gas. Various deep saline formations with sufficient capacity to accept and store large volumes of CO2 in supercritical phase exist at the appropriate depth and are overlain by thick confining shale units. Most importantly, a wealth of data...

Tags

Bedrock Topography of Alberta (gridded data, ASCII format)

Description

The bedrock topography of Alberta is the surface of the top of Upper Cretaceous and Paleogene bedrock, and reveals geomorphic features created by Paleogene to Recent river systems and Quaternary... More ≫

Description

The bedrock topography of Alberta is the surface of the top of Upper Cretaceous and Paleogene bedrock, and reveals geomorphic features created by Paleogene to Recent river systems and Quaternary glaciation. This grid is a computer-generated geostatistical model of the bedrock topography of Alberta using previously published information from Alberta Geological Survey (AGS) maps and reports, as well as new data. The quality of this data has been assessed and then a quality-weighting approach was applied to the dataset prior to interpolation. The surface was modelled using a 500m x 500m grid cell spacing, and as such should not be used for local scale studies. This grid represents the surface portrayed in AGS Map 602, Bedrock Topography of Alberta, and this grid will continue to be updated as part of the Alberta Geological Framework project. Explanatory notes, references, and data sources appear on a supplementary page to accompany Map 602. These notes describe the distribution of...

Tags

Hasse Lake, Alberta - Bathymetry, Digital Elevation Model (Arc ASCII grid format)

Description

All available bathymetry and related information for Hasse Lake were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar... More ≫

Description

All available bathymetry and related information for Hasse Lake were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar Topography Mission 'SRTM' imagery and Indian Remote Sensing 'IRS' imagery) and corrected where necessary. The published data set contains the lake bathymetry formatted as an Arc ascii grid. Bathymetric contours and the boundary polygon are available as shapefiles.

Tags

Shiningbank Lake, Alberta - Bathymetry, Digital Elevation Model (Arc ASCII grid format)

Description

All available bathymetry and related information for Shiningbank Lake were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar... More ≫

Description

All available bathymetry and related information for Shiningbank Lake were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar Topography Mission 'SRTM' imagery and Indian Remote Sensing 'IRS' imagery) and corrected where necessary. The published data set contains the lake bathymetry formatted as an Arc ascii grid. Bathymetric contours and the boundary polygon are available as shapefiles.

Tags

Spring Lake, Alberta - Bathymetry, Digital Elevation Model (Arc ASCII grid format)

Description

All available bathymetry and related information for Spring Lake were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar... More ≫

Description

All available bathymetry and related information for Spring Lake were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar Topography Mission 'SRTM' imagery and Indian Remote Sensing 'IRS' imagery) and corrected where necessary. The published data set contains the lake bathymetry formatted as an Arc ascii grid. Bathymetric contours and the boundary polygon are available as shapefiles.

Tags

Database for the Edson CBM Exploration Block-Alberta, Ardley Coal Zone Characterization and Sandstone Channels Geometry

Description

Database is designed to define the Ardley coal picks including coal stratigraphic correlation and coal quality (clean coal, shaly-coal and coaly-shale), formation tops and lithological components,... More ≫

Description

Database is designed to define the Ardley coal picks including coal stratigraphic correlation and coal quality (clean coal, shaly-coal and coaly-shale), formation tops and lithological components, such as sandstone channels and tonstein markers. It represents the base of the Edson CBM Exploration Block-Alberta, Ardley Coal Zone Characterization and Sandstone Channels Geometry report, Earth Sciences Report 2007-06.

Tags

Buck Lake, Alberta - Bathymetry, Digital Elevation Model (Arc ASCII grid format)

Description

All available bathymetry and related information for Buck Lake were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar... More ≫

Description

All available bathymetry and related information for Buck Lake were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar Topography Mission 'SRTM' imagery and Indian Remote Sensing 'IRS' imagery) and corrected where necessary. The published data set contains the lake bathymetry formatted as an Arc ascii grid. Bathymetric contours and the boundary polygon are available as shapefiles.

Tags

Johnnys Lake, Alberta - Bathymetry, Digital Elevation Model (Arc ASCII grid format)

Description

All available bathymetry and related information for Johnnys Lake were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar... More ≫

Description

All available bathymetry and related information for Johnnys Lake were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar Topography Mission 'SRTM' imagery and Indian Remote Sensing 'IRS' imagery) and corrected where necessary. The published data set contains the lake bathymetry formatted as an Arc ascii grid. Bathymetric contours and the boundary polygon are available as shapefiles.

Tags

Wabamun Lake, Alberta - Bathymetry, Digital Elevation Model (Arc ASCII grid format)

Description

All available bathymetry and related information for Wabamun Lake were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar... More ≫

Description

All available bathymetry and related information for Wabamun Lake were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar Topography Mission 'SRTM' imagery and Indian Remote Sensing 'IRS' imagery) and corrected where necessary. The published data set contains the lake bathymetry formatted as an Arc ascii grid. Bathymetric contours and the boundary polygon are available as shapefiles.

Tags

Structure Top of the Haynes Aquifer, Alberta (Gridded data, ASCII format)

Description

This is a 1000 m cell-sized raster grid dataset of the top of the sandstone of the Haynes member of the Paskapoo Formation. We mapped the sandstone using 3-D geostatistical modelling algorithms... More ≫

Description

This is a 1000 m cell-sized raster grid dataset of the top of the sandstone of the Haynes member of the Paskapoo Formation. We mapped the sandstone using 3-D geostatistical modelling algorithms from data derived from sand calculations of 25 m thick slice intervals of the Paskapoo Formation. We selected the >55% sand isovalue to define sandstone, based on the results of mini-models that show vertical hydraulic connections being established if sand abundance is 55% or greater. This grid represents the upper surface of that three-dimensional body defined by the >55% sand threshold value. Alberta Geological Survey Bulletin 66 provides a detailed description of how the unit was defined. The dataset is in ESRI ASCII grid format.

Tags