All Resources

Bedrock Topography of Alberta (gridded data, ASCII format)

Description

The bedrock topography of Alberta is the surface of the top of Upper Cretaceous and Paleogene bedrock, and reveals geomorphic features created by Paleogene to Recent river systems and Quaternary... More ≫

Description

The bedrock topography of Alberta is the surface of the top of Upper Cretaceous and Paleogene bedrock, and reveals geomorphic features created by Paleogene to Recent river systems and Quaternary glaciation. This grid is a computer-generated geostatistical model of the bedrock topography of Alberta using previously published information from Alberta Geological Survey (AGS) maps and reports, as well as new data. The quality of this data has been assessed and then a quality-weighting approach was applied to the dataset prior to interpolation. The surface was modelled using a 500m x 500m grid cell spacing, and as such should not be used for local scale studies. This grid represents the surface portrayed in AGS Map 602, Bedrock Topography of Alberta, and this grid will continue to be updated as part of the Alberta Geological Framework project. Explanatory notes, references, and data sources appear on a supplementary page to accompany Map 602. These notes describe the distribution of...

Tags

Alberta Kimberlite Xenocryst Dataset

Description

This kimberlite xenocryst dataset includes the electronic microprobe data from silicate and oxide xenocryst minerals from various ultrabasic to kimberlite rock occurrences in the northern Alberta... More ≫

Description

This kimberlite xenocryst dataset includes the electronic microprobe data from silicate and oxide xenocryst minerals from various ultrabasic to kimberlite rock occurrences in the northern Alberta kimberlite province. These data, which total 4,285 analyses, include 897 garnet 533 clinopyroxene 791 olivine 275 phlogopite 870 spinel/chromite 919 ilmenite

Tags

Alberta Diamond Occurrences Dataset

Description

The first clue to the presence of possible diamond-bearing source rocks in northern Alberta was the discovery of a perfect octahedral diamond, estimated at about 0.83 carats in weight, by farm... More ≫

Description

The first clue to the presence of possible diamond-bearing source rocks in northern Alberta was the discovery of a perfect octahedral diamond, estimated at about 0.83 carats in weight, by farm worker Einar Opdahl during 1958 in the Evansburg area of west-central Alberta. Since the Opdahl diamond, no new diamond finds were reported in northern Alberta until the 1990s, when several occurrences of alluvial diamond and diamondiferous kimberlite were discovered.

Tags

Alberta Diamond Inclusion Dataset

Description

This Alberta diamond inclusion dataset includes electron microprobe analyses of garnet, clinopyroxene, olivine, ferropericlase and rutile inclusions from diamonds sampled by the Buffalo Head Hills... More ≫

Description

This Alberta diamond inclusion dataset includes electron microprobe analyses of garnet, clinopyroxene, olivine, ferropericlase and rutile inclusions from diamonds sampled by the Buffalo Head Hills kimberlite field. The data are compiled from Davies et al. (2004) and Banas (2006). Diamond inclusions are of particular research interest in diamond exploration and mantle petrology because they provide direct information about the chemical composition of upper and lower mantle and about the petrogenetic sources of diamonds in a given area/deposit.

Tags

Twentieth Percentile Modelled Base of the Paskapoo Formation, Alberta (Gridded data, ASCII format)

Description

The base of the Paskapoo Formation is unconformable with the underlying Scollard Formation. Alberta Geological Survey differentiates the Paskapoo Formation from the underlying Scollard Formation... More ≫

Description

The base of the Paskapoo Formation is unconformable with the underlying Scollard Formation. Alberta Geological Survey differentiates the Paskapoo Formation from the underlying Scollard Formation by the first thick sandstone above the uppermost coal seam of the Ardley coal zone. We defined 'thick sandstone' to be 5 m or more thick. This dataset contains the gridded results of the structural surface of the base of the Paskapoo Formation modelled from stratigraphic picks of the >5 m sand above the Scollard Formation coal from oil and gas industry gamma-ray logs. We modelled only the undeformed part of the Paskapoo Formation, which lies east of the Rocky Mountains deformation belt. Because of uncertainty in defining the Paskapoo-Scollard contact, we selected the P20 (20th percentile or low estimate) modelled surface of those data, which is about 5 m deeper than the P50 or median estimated surface. Subsequent boundaries of slices were constructed parallel to this surface, recognizing...

Tags

Isopach of the Sunchild Aquifer, Alberta (Gridded data, ASCII format)

Description

Sand bodies within the Sunchild aquifer subcrop over most of its extent, and because overlying Neogene sediment is relatively thin in the western part of the Paskapoo Formation, the unit expresses... More ≫

Description

Sand bodies within the Sunchild aquifer subcrop over most of its extent, and because overlying Neogene sediment is relatively thin in the western part of the Paskapoo Formation, the unit expresses itself as the present-day topography. Constructing the Sunchild aquifer-thickness map was somewhat problematic because of the difficulty of mapping the step-like distribution and connection of sand bodies that, in places, are laterally adjacent to muddy intervals. The resultant isopach was generated by subtracting the Lacombe Member surface from the Sunchild surface to yield an approximation of Sunchild aquifer thickness. The Sunchild aquifer thickens from less than 50 m in the east to more than 300 m to the west. The apparent great thickness (about 600 to 700 m) of aquifer along the deformation edge southwest of Drayton Valley is interpreted as an area of stacked, coarse fluvial deposits extending from the base of the Paskapoo Formation almost to surface.

Tags

Isopach of the Lacombe Aquitard, Alberta (Gridded data, ASCII format)

Description

This dataset maps the thickness of the Lacombe aquitard as defined by outputs of a 3-D model of sandiness in the Paskapoo Formation. The Lacombe aquitard consists of >65% non-sandy material in... More ≫

Description

This dataset maps the thickness of the Lacombe aquitard as defined by outputs of a 3-D model of sandiness in the Paskapoo Formation. The Lacombe aquitard consists of >65% non-sandy material in stacked, 25 m thick slices above the base of the Paskapoo Formation.

Tags

Isopach of the Paskapoo Formation, Alberta (Gridded data, ASCII format)

Description

This is a raster dataset of the thickness of the Paskapoo Formation. It is a derived dataset created by the subtraction of the base of the Paskapoo Formation from the top of the formation, which... More ≫

Description

This is a raster dataset of the thickness of the Paskapoo Formation. It is a derived dataset created by the subtraction of the base of the Paskapoo Formation from the top of the formation, which in the western part of Alberta is also the bedrock topography. The gridded isopach data cover only the undeformed part of the Paskapoo Formation that extends west to the front ranges of the Rocky Mountains. The isopach data do not include those parts of the formation affected by tectonic folding or thrusting. The dataset is in ESRI ASCII grid format.

Tags

Thickness and Distribution of Quaternary and Neogene Sediment in Alberta, Canada (Gridded data, ASCII format)

Description

This GIS dataset depicts a geostatistical model of the thickness of sediment overlying bedrock in Alberta. The sediment thickness surface was generated to assist the construction of a new... More ≫

Description

This GIS dataset depicts a geostatistical model of the thickness of sediment overlying bedrock in Alberta. The sediment thickness surface was generated to assist the construction of a new geological framework for Alberta. The surface was derived by subtracting the bedrock topography of Alberta (Alberta Geological Survey Map 550) from the 60 m Shuttle Radar Topography Mission digital elevation model. These data comprise the raster surface of Alberta Geological Survey Map 551, Thickness of Quaternary and Neogene Sediment in Alberta, Canada.

Tags

Bedrock Topography of Alberta, Canada (Gridded data, ASCII format)

Description

This GIS dataset depicts the result of a geostatistical model of the bedrock topography in Alberta. This model is based on water-well litholog data, stratigraphic picks made on oil and gas... More ≫

Description

This GIS dataset depicts the result of a geostatistical model of the bedrock topography in Alberta. This model is based on water-well litholog data, stratigraphic picks made on oil and gas petrophysical logs, data derived from digitized contour interpretations on bedrock topography maps, including bedrock outcrop locations and the 60 m grid-spaced Shuttle Rader Topography Mission digital elevation model. These data comprise the raster surface of Alberta Geological Survey Map 550, Bedrock Topography of Alberta, Canada.

Tags