All Resources

CBM Potential of the Alberta Plains - Calculated Gas In Place of the Drumheller Coal Zone (GIS dataset)

Description

Alberta Geological Survey created a coal and coalbed methane (CBM) database to capture and manage CBM data. The database compiles different sources and contains information on 7923 wells (15,200... More ≫

Description

Alberta Geological Survey created a coal and coalbed methane (CBM) database to capture and manage CBM data. The database compiles different sources and contains information on 7923 wells (15,200 formation picks, 37,357 coal picks, 495 coal analyses and 363 vitrinite reflectance measurements). From this parent dataset, individual coal zone was evaluated. This record describes the Drumheller Coal Zone's calculated gas in place in Bcf/section.

Tags

CBM Potential of the Alberta Plains - Calculated Gas In Place of the Carbon Thompson Coal Zone (GIS dataset)

Description

Alberta Geological Survey created a coal and coalbed methane (CBM) database to capture and manage CBM data. The database compiles different sources and contains information on 7923 wells (15,200... More ≫

Description

Alberta Geological Survey created a coal and coalbed methane (CBM) database to capture and manage CBM data. The database compiles different sources and contains information on 7923 wells (15,200 formation picks, 37,357 coal picks, 495 coal analyses and 363 vitrinite reflectance measurements). From this parent dataset, individual coal zone was evaluated. This record describes the Carbon Thompson coal zone's calculated gas in place in Bcf/section.

Tags

CBM Potential of the Alberta Plains - Calculated Gas In Place of the Ardley Coal Zone (GIS dataset)

Description

Alberta Geological Survey created a coal and coalbed methane (CBM) database to capture and manage CBM data. The database compiles different sources and contains information on 7923 wells (15,200... More ≫

Description

Alberta Geological Survey created a coal and coalbed methane (CBM) database to capture and manage CBM data. The database compiles different sources and contains information on 7923 wells (15,200 formation picks, 37,357 coal picks, 495 coal analyses and 363 vitrinite reflectance measurements). From this parent dataset, individual coal zones were evaluated. This record describes the Ardley Coal Zone's calculated gas-in-place in Bcf/section.

Tags

Top of the Belly River Group in the Alberta Plains: Subsurface Stratigraphic Picks and Modelled Surface (tabular data, tab delimited format, to accompany Open File Report 2010-10)

Description

The dataset includes subsurface stratigraphic picks of the top of the Belly River Group in the Alberta Plains (Townships 1 to 50, Ranges 1W4 to 2W5) made from wireline, geophysical well logs. The... More ≫

Description

The dataset includes subsurface stratigraphic picks of the top of the Belly River Group in the Alberta Plains (Townships 1 to 50, Ranges 1W4 to 2W5) made from wireline, geophysical well logs. The dataset supplements Alberta Geological Survey Open File Report 2010-10, which describes the methodology. We screened the well data to detect errors resulting from deviated wells, as well as incorrect ground and kelly bushing elevation data. We used statistical methods to identify local and regional statistical outliers, which were examined individually.

Tags

Bedrock Topography of the Edmonton-Calgary Corridor, Alberta (GIS data, ASCII grid format)

Description

This GIS dataset depicts the structural bedrock top surface in the Edmonton-Calgary Corridor based on water-well litholog data, including bedrock outcrop locations. We sourced the well data from... More ≫

Description

This GIS dataset depicts the structural bedrock top surface in the Edmonton-Calgary Corridor based on water-well litholog data, including bedrock outcrop locations. We sourced the well data from an internal Edmonton-Calgary Corridor geological mapping database. This surface provides a geological model for the region. These data comprise the raster surface of Alberta Geological Survey Map 549, Bedrock Topography of the Edmonton-Calgary Corridor, Alberta.

Tags

Twentieth Percentile Modelled Base of the Paskapoo Formation, Alberta (Gridded data, ASCII format)

Description

The base of the Paskapoo Formation is unconformable with the underlying Scollard Formation. Alberta Geological Survey differentiates the Paskapoo Formation from the underlying Scollard Formation... More ≫

Description

The base of the Paskapoo Formation is unconformable with the underlying Scollard Formation. Alberta Geological Survey differentiates the Paskapoo Formation from the underlying Scollard Formation by the first thick sandstone above the uppermost coal seam of the Ardley coal zone. We defined 'thick sandstone' to be 5 m or more thick. This dataset contains the gridded results of the structural surface of the base of the Paskapoo Formation modelled from stratigraphic picks of the >5 m sand above the Scollard Formation coal from oil and gas industry gamma-ray logs. We modelled only the undeformed part of the Paskapoo Formation, which lies east of the Rocky Mountains deformation belt. Because of uncertainty in defining the Paskapoo-Scollard contact, we selected the P20 (20th percentile or low estimate) modelled surface of those data, which is about 5 m deeper than the P50 or median estimated surface. Subsequent boundaries of slices were constructed parallel to this surface, recognizing...

Tags

Isopach of the Sunchild Aquifer, Alberta (Gridded data, ASCII format)

Description

Sand bodies within the Sunchild aquifer subcrop over most of its extent, and because overlying Neogene sediment is relatively thin in the western part of the Paskapoo Formation, the unit expresses... More ≫

Description

Sand bodies within the Sunchild aquifer subcrop over most of its extent, and because overlying Neogene sediment is relatively thin in the western part of the Paskapoo Formation, the unit expresses itself as the present-day topography. Constructing the Sunchild aquifer-thickness map was somewhat problematic because of the difficulty of mapping the step-like distribution and connection of sand bodies that, in places, are laterally adjacent to muddy intervals. The resultant isopach was generated by subtracting the Lacombe Member surface from the Sunchild surface to yield an approximation of Sunchild aquifer thickness. The Sunchild aquifer thickens from less than 50 m in the east to more than 300 m to the west. The apparent great thickness (about 600 to 700 m) of aquifer along the deformation edge southwest of Drayton Valley is interpreted as an area of stacked, coarse fluvial deposits extending from the base of the Paskapoo Formation almost to surface.

Tags

Isopach of the Lacombe Aquitard, Alberta (Gridded data, ASCII format)

Description

This dataset maps the thickness of the Lacombe aquitard as defined by outputs of a 3-D model of sandiness in the Paskapoo Formation. The Lacombe aquitard consists of >65% non-sandy material in... More ≫

Description

This dataset maps the thickness of the Lacombe aquitard as defined by outputs of a 3-D model of sandiness in the Paskapoo Formation. The Lacombe aquitard consists of >65% non-sandy material in stacked, 25 m thick slices above the base of the Paskapoo Formation.

Tags

Structure Top of the Haynes Aquifer, Alberta (Gridded data, ASCII format)

Description

This is a 1000 m cell-sized raster grid dataset of the top of the sandstone of the Haynes member of the Paskapoo Formation. We mapped the sandstone using 3-D geostatistical modelling algorithms... More ≫

Description

This is a 1000 m cell-sized raster grid dataset of the top of the sandstone of the Haynes member of the Paskapoo Formation. We mapped the sandstone using 3-D geostatistical modelling algorithms from data derived from sand calculations of 25 m thick slice intervals of the Paskapoo Formation. We selected the >55% sand isovalue to define sandstone, based on the results of mini-models that show vertical hydraulic connections being established if sand abundance is 55% or greater. This grid represents the upper surface of that three-dimensional body defined by the >55% sand threshold value. Alberta Geological Survey Bulletin 66 provides a detailed description of how the unit was defined. The dataset is in ESRI ASCII grid format.

Tags

Isopach of the Paskapoo Formation, Alberta (Gridded data, ASCII format)

Description

This is a raster dataset of the thickness of the Paskapoo Formation. It is a derived dataset created by the subtraction of the base of the Paskapoo Formation from the top of the formation, which... More ≫

Description

This is a raster dataset of the thickness of the Paskapoo Formation. It is a derived dataset created by the subtraction of the base of the Paskapoo Formation from the top of the formation, which in the western part of Alberta is also the bedrock topography. The gridded isopach data cover only the undeformed part of the Paskapoo Formation that extends west to the front ranges of the Rocky Mountains. The isopach data do not include those parts of the formation affected by tectonic folding or thrusting. The dataset is in ESRI ASCII grid format.

Tags