All Resources

Quantification protocol for nitrous oxide abatement from nitric acid production. Version 1.0

Description

This protocol quantifies reductions in greenhouse gas (GHG) emissions resulting from the installation of a dedicated N2O abatement catalyst inside the ammonia burner of a nitric acid plant. This... More ≫

Description

This protocol quantifies reductions in greenhouse gas (GHG) emissions resulting from the installation of a dedicated N2O abatement catalyst inside the ammonia burner of a nitric acid plant. This protocol applies to projects where the nitrous oxide would otherwise have been released into the atmosphere during the production of nitric acid as it does not have any economic value or toxicity at emission levels typical of nitric acid manufacture.

Tags

Quantification protocol for the substitution of bitumen binder in hot mix asphalt production and usage. Version 1.0

Description

This protocol is applicable to projects that involve the substitution of a proportion of the bitumen binder used in conventional hot mix asphalt for a sulphur product that reduces required... More ≫

Description

This protocol is applicable to projects that involve the substitution of a proportion of the bitumen binder used in conventional hot mix asphalt for a sulphur product that reduces required quantities of aggregate and bitumen, fuel usage due to reduced mix production temperatures and reduces emissions from the hot mix plant stack and paving application.

Tags

Quantification protocol for engine fuel management and vent gas capture projects. Version 1.0

Description

This protocol quantifies greenhouse gas (GHG) reductions that result from two related activities: the improvement in the fuel efficiency of natural gas combustion engines, and the capture of gases... More ≫

Description

This protocol quantifies greenhouse gas (GHG) reductions that result from two related activities: the improvement in the fuel efficiency of natural gas combustion engines, and the capture of gases (primarily methane) normally vented to the atmosphere. The quantification approaches for measuring GHG reductions for both components are based on measurement and monitoring and thus provide a high level of accuracy. The protocol is written for those familiar with the operation of natural gas combustion engines and control systems that manage the fuel consumption for these engines.

Tags

Quantification protocol for instrument gas to instrument air conversion in process control systems. Version 1.x

Description

This protocol serves as a generic ‘recipe’ for project proponents to follow in order to meet the measurement, monitoring, and greenhouse gas quantification requirements for reductions resulting... More ≫

Description

This protocol serves as a generic ‘recipe’ for project proponents to follow in order to meet the measurement, monitoring, and greenhouse gas quantification requirements for reductions resulting from conversion of instrument gas to instrument air in process control systems. A process flow diagram for a typical project using compressed air to provide pressure to instrument controllers. Upon conversion, all methane that would have been vented will be replaced by compressed air.

Tags

Specified gas emitters regulation : quantification protocol for tillage system management. Version 1.3

Description

This protocol provides a default methodology for quantifying carbon offsets through projects that undertake reduced tillage on agricultural land. Theoretically, this protocol can be applied to all... More ≫

Description

This protocol provides a default methodology for quantifying carbon offsets through projects that undertake reduced tillage on agricultural land. Theoretically, this protocol can be applied to all land and all agricultural producers across the country; however, more work will need to be done for soil zones outside the prairies with respect to the assurance factor.

Tags

Quantification protocol for anaerobic treatment of wastewater projects. Version 1.0

Description

This protocol is applicable to projects that involve the capture and destruction of methane produced from anaerobic wastewater treatment processes and take actions to prevent the venting of biogas... More ≫

Description

This protocol is applicable to projects that involve the capture and destruction of methane produced from anaerobic wastewater treatment processes and take actions to prevent the venting of biogas to the atmosphere. These systems could be installed as retrofits or modifications to existing wastewater treatment operations or implemented at new Greenfield facilities as the best available control technology. The feedstock to the anaerobic digestion system may be untreated industrial wastewater or sludge produced from other wastewater treatment processes at the project site.

Tags

Specified gas emitters regulation : technical guidance for completing baseline emissions intensity applications. Version 2.0

Description

This document is intended to assist regulated facilities under the Specified Gas Emitters Regulation with the completion of the baseline emissions intensity applications. Greenhouse gas emissions... More ≫

Description

This document is intended to assist regulated facilities under the Specified Gas Emitters Regulation with the completion of the baseline emissions intensity applications. Greenhouse gas emissions intensity is regulated on a facility-by-facility basis. Targets are set at the facility and that facility's performance over time is compared against its approved baseline emissions intensity.

Tags

Quantification protocol for aerobic composting projects. Version 1.1

Description

This protocol covers the diversion of organic residues from landfill for biological decomposition to a condition sufficiently stable for nuisance-free storage and for safe use in land application.

Tags

Quantification protocol for non-incineration thermal waste conversion. Version 1.0

Description

This protocol quantifies the emission reductions from the avoidance of fossil fuel consumption, replaced by municipal solid waste on an equivalent energy potential basis. It also specifically... More ≫

Description

This protocol quantifies the emission reductions from the avoidance of fossil fuel consumption, replaced by municipal solid waste on an equivalent energy potential basis. It also specifically includes reductions in GHG emissions due to any heat/power production and electricity generation related to the process, and from the avoidance of landfilling any organic materials which may be diverted for conversion to Biofuel.

Tags

Quantification protocol for acid gas injection. Version 1

Description

This quantification protocol is written for the acid gas processing system operator or an acid gas project developer. Some familiarity with, or general understanding of, the operation of an acid... More ≫

Description

This quantification protocol is written for the acid gas processing system operator or an acid gas project developer. Some familiarity with, or general understanding of, the operation of an acid gas processing facility is assumed. The opportunity for generating carbon offsets with this protocol arises from the direct and indirect reductions of greenhouse gas (GHG) emissions resulting from the geological sequestration of acid gas streams containing greenhouse gases as part of raw natural gas processing.

Tags