All Resources

72 - Historical Planimetric Maps

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series... More ≫

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series base maps were initiated in 1949 and derived from aerial photographs taken during the years 1949 to 1952. These maps display: Alberta Township System (ATS) - hydrographic features - provincial highways - roads - pipelines - transmission lines - municipalities. These maps are not available as GIS-ready data. All available maps are provided in Adobe PDF and TIF format. To obtain the TIF format, please contact the distributor. Geo-referenced PNG files are also available for most maps. Please note that the coverage for the province is incomplete and it is not known if further coverage will be added.

Tags

73 - Historical Planimetric Maps

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series... More ≫

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series base maps were initiated in 1949 and derived from aerial photographs taken during the years 1949 to 1952. These maps display: Alberta Township System (ATS) - hydrographic features - provincial highways - roads - pipelines - transmission lines - municipalities. These maps are not available as GIS-ready data. All available maps are provided in Adobe PDF and TIF format. To obtain the TIF format, please contact the distributor. Geo-referenced PNG files are also available for some maps, but some are roughly georeferenced with only a few control points. Please note that the coverage for the province is incomplete and it is not known if further coverage will be added. Some maps were also updated after their initial publication, please refer to the maps for the most current dates.

Tags

74 - Historical Planimetric Maps

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series... More ≫

Description

This historical map series consists of the Planimetric Series printed monochrome maps named using the National Topographic System (NTS) map sheet identifier within Alberta. The Planimetric Series base maps were initiated in 1949 and derived from aerial photographs taken during the years 1949 to 1952. These maps display: Alberta Township System (ATS) - hydrographic features - provincial highways - roads - pipelines - transmission lines - municipalities. These maps are not available as GIS-ready data. All available maps are provided in Adobe PDF and TIF format. To obtain the TIF format, please contact the distributor. Geo-referenced PNG files are also available for some maps, but some are roughly georeferenced with only a few control points. Please note that the coverage for the province is incomplete and it is not known if further coverage will be added. Some maps were also updated after their initial publication, please refer to the maps for the most current dates.

Tags

Alberta Provincial Boundary - 2007

Description

The Alberta Provincial Boundary dataset is a polygon that represents the bounding limits of the Province of Alberta as of February 2007. This version of the boundary has been superseded by the ATS... More ≫

Description

The Alberta Provincial Boundary dataset is a polygon that represents the bounding limits of the Province of Alberta as of February 2007. This version of the boundary has been superseded by the ATS v4.1 Alberta Provincial Boundary, published April 2010.

Tags

Historical Hydrographic Survey - Bathymetric Maps

Description

This historical map series consists of hydrographic survey - bathymetric printed monochrome maps of select lakes and reservoirs within Alberta. These maps were produced in various map scales over... More ≫

Description

This historical map series consists of hydrographic survey - bathymetric printed monochrome maps of select lakes and reservoirs within Alberta. These maps were produced in various map scales over time. please refer to each map for scale details. This product can be viewed on a computer, printed or be plotted in part or in whole. All available maps are provided in Adobe PDF format within a downloadable WinZip file. This series is not updated and contains a range of publication dates.

Tags

West of 5th Meridian - Historical Forest Inventory - Phase 3 Maps

Description

The Phase 3 Forest Inventory Program commenced in 1970 and the initial data collection was completed in 1984 as per a 1966 federal-provincial task force recommendation that a provincial forest... More ≫

Description

The Phase 3 Forest Inventory Program commenced in 1970 and the initial data collection was completed in 1984 as per a 1966 federal-provincial task force recommendation that a provincial forest inventory should be completed before private company timber harvest quotas came up for renewal in 1986. The inventory was initiated by the Alberta Forestry, Lands and Wildlife Department and was intended to facilitate future forest management plans and the revision of annual allowable cuts. The extent of the Phase 3 Forest Inventory reflects the extent of Alberta's Green Area and fringe areas at that time minus three Forest Management Units in the north (A13, F10 and F20), the Cold Lake Air Weapons Range (L9), the Federal Indian Reserves and the Wilderness Areas. Under the Phase 3 Forest Inventory Program, the cover types were interpreted from aerial photography (mainly 1:15 000 black and white) to generate a hardcopy map base. These maps are not available as geo-referenced rectified images or...

Tags

West of 6th Meridian - Historical Forest Inventory - Phase 3 Maps

Description

The Phase 3 Forest Inventory Program commenced in 1970 and the initial data collection was completed in 1984 as per a 1966 federal-provincial task force recommendation that a provincial forest... More ≫

Description

The Phase 3 Forest Inventory Program commenced in 1970 and the initial data collection was completed in 1984 as per a 1966 federal-provincial task force recommendation that a provincial forest inventory should be completed before private company timber harvest quotas came up for renewal in 1986. The inventory was initiated by the Alberta Forestry, Lands and Wildlife Department and was intended to facilitate future forest management plans and the revision of annual allowable cuts. The extent of the Phase 3 Forest Inventory reflects the extent of Alberta's Green Area and fringe areas at that time minus three Forest Management Units in the north (A13, F10 and F20), the Cold Lake Air Weapons Range (L9), the Federal Indian Reserves and the Wilderness Areas. Under the Phase 3 Forest Inventory Program, the cover types were interpreted from aerial photography (mainly 1:15 000 black and white) to generate a hardcopy map base. These maps are not available as geo-referenced rectified images or...

Tags

West of 4th Meridian - Historical Forest Inventory - Phase 3 Maps

Description

The Phase 3 Forest Inventory Program commenced in 1970 and the initial data collection was completed in 1984 as per a 1966 federal-provincial task force recommendation that a provincial forest... More ≫

Description

The Phase 3 Forest Inventory Program commenced in 1970 and the initial data collection was completed in 1984 as per a 1966 federal-provincial task force recommendation that a provincial forest inventory should be completed before private company timber harvest quotas came up for renewal in 1986. The inventory was initiated by the Alberta Forestry, Lands and Wildlife Department and was intended to facilitate future forest management plans and the revision of annual allowable cuts. The extent of the Phase 3 Forest Inventory reflects the extent of Alberta's Green Area and fringe areas at that time minus three Forest Management Units in the north (A13, F10 and F20), the Cold Lake Air Weapons Range (L9), the Federal Indian Reserves and the Wilderness Areas. Under the Phase 3 Forest Inventory Program, the cover types were interpreted from aerial photography (mainly 1:15 000 black and white) to generate a hardcopy map base. These maps are not available as geo-referenced rectified images or...

Tags

74 - Historical Forest Inventory - Phase 1 (Broad Scale) Maps

Description

The Phase 1 (Broad Scale) Forest Inventory was initiated in 1949 and completed by 1956. The Phase 1 (Broad Scale) Forest Inventory included all publicly owned forested lands in the province except... More ≫

Description

The Phase 1 (Broad Scale) Forest Inventory was initiated in 1949 and completed by 1956. The Phase 1 (Broad Scale) Forest Inventory included all publicly owned forested lands in the province except Indian lands, national parks, and an area known as the Rocky Mountains Forest Reserve. The Phase 1 (Broad Scale) Forest Inventory was used to define lands suitable for agriculture, to determine timber harvest levels and plan forest protection and timber and industrial development. Through aerial photo interpretation, land was classified as productive, potentially productive, or non-productive. On productive forest land, homogeneous groups of trees were classified by 'cover types'. Cover types included crown density, height and tree species. Burned, harvested or cultivated land was identified as potentially productive. Non-productive lands included areas with organic soils, barren rock and lakes. No ages or site classes are associated with the polygons. The minimum polygon size was 65 ha....

Tags

83 - Historical Forest Inventory - Phase 1 (Broad Scale) Maps

Description

The Phase 1 (Broad Scale) Forest Inventory was initiated in 1949 and completed by 1956. The Phase 1 (Broad Scale) Forest Inventory included all publicly owned forested lands in the province except... More ≫

Description

The Phase 1 (Broad Scale) Forest Inventory was initiated in 1949 and completed by 1956. The Phase 1 (Broad Scale) Forest Inventory included all publicly owned forested lands in the province except Indian lands, national parks, and an area known as the Rocky Mountains Forest Reserve. The Phase 1 (Broad Scale) Forest Inventory was used to define lands suitable for agriculture, to determine timber harvest levels and plan forest protection and timber and industrial development. Through aerial photo interpretation, land was classified as productive, potentially productive, or non-productive. On productive forest land, homogeneous groups of trees were classified by 'cover types'. Cover types included crown density, height and tree species. Burned, harvested or cultivated land was identified as potentially productive. Non-productive lands included areas with organic soils, barren rock and lakes. No ages or site classes are associated with the polygons. The minimum polygon size was 65 ha....

Tags