All Resources

Workplace first aiders and legal requirements

Description

This Safety Bulletin outlines the requirements of specific sections of Alberta’s legislation that are relevant to work site first aiders. Anyone responsible for providing first aid services at the... More ≫

Description

This Safety Bulletin outlines the requirements of specific sections of Alberta’s legislation that are relevant to work site first aiders. Anyone responsible for providing first aid services at the workplace needs to understand what is required by law.

Tags

Radon in the workplace

Description

Provides information about the health effects of radon exposure, where a worker can be exposed to radon at workplace, how to test for radon, and how can exposure be controlled.

Tags

Worker exposure to asbestos in the demolition and renovation industries

Description

Asbestos is a group of naturally occurring fibrous minerals with unique physical characteristics including extraordinary tensile strength, poor heat conduction and resistance to chemical attack.... More ≫

Description

Asbestos is a group of naturally occurring fibrous minerals with unique physical characteristics including extraordinary tensile strength, poor heat conduction and resistance to chemical attack. For these reasons, asbestos was often used as an ingredient in a wide range of construction products. Unprotected workers can be exposed to asbestos mainly by breathing in the fibres which are released when the asbestos containing materials (ACM) are disturbed. During building demolition, asbestos fibres may be released if building materials containing asbestos have not been removed. If the building was built before 1990 there is a chance that some materials may contain asbestos.

Tags

Hazard assessment and control : a handbook for Alberta employers and workers [2015]

Description

The hazard assessment and control process provides a consistent approach for employers and workers to identify and control hazards in the workplace. It allows everyone to focus their efforts in... More ≫

Description

The hazard assessment and control process provides a consistent approach for employers and workers to identify and control hazards in the workplace. It allows everyone to focus their efforts in the right areas, and to develop worker training, inspections, emergency response plans, etc. specific to the hazards at their work sites. Alberta’s Occupational Health and Safety legislation requires employers to conduct hazard assessments, and to either eliminate the hazards identified or put controls in place to protect against them.

Tags

Leading indicators for workplace health and safety : a user guide [2015]

Description

This user guide provides an overview of what leading indicators are, and how and why they might be applied to strengthen your organization’s health and safety culture and performance. Some leading... More ≫

Description

This user guide provides an overview of what leading indicators are, and how and why they might be applied to strengthen your organization’s health and safety culture and performance. Some leading indicators may be more effective than others, depending on an organization’s current level of OHS performance. For that reason, the user guide considers three categories of OHS performance: those that are focused on maintaining compliance with Alberta legislation, those looking for improvement (beyond compliance), and those in pursuit of continuous learning for the highest levels of performance. A tool is provided to help establish which category best describes your organization’s current OHS performance level, as well as sample leading indicators for each performance category — for your consideration.

Tags

Lead exposure in the firearm industry : lead and the health effects of lead exposure

Description

Lead is a bluish-grey metal that is naturally present in the earth’s crust. Lead is used in the manufacturing of many consumer and industrial products and can be found in a variety of workplaces.... More ≫

Description

Lead is a bluish-grey metal that is naturally present in the earth’s crust. Lead is used in the manufacturing of many consumer and industrial products and can be found in a variety of workplaces. Workers can be exposed to lead mainly through breathing in lead dust, fumes and vapour, or by ingestion. Ingestion usually occurs by eating, drinking or smoking in areas where lead contamination exists or hand to mouth transfer of lead including nail biting, licking one’s finger or touching one’s face. The health effects from lead exposure are the same regardless of how a worker is exposed. Most of the lead will leave the body when we go to the bathroom, lose skin cells, etc. The lead that remains in the body tends to accumulate through ongoing exposures and can be released into the blood at a later time long after the original exposure happened.

Tags

Forklift health & safety : best practices guideline [2014]

Description

This best practices guideline provides practical guidance to help employers fulfill their obligations to protect the health and safety of workers who operate or work around forklifts.

Tags

Best practice - working safely in the heat and cold

Description

This publication describes the health risks associated with working in extreme heat and cold situations, and suggests reasonable solutions for workplaces. It is intended primarily for people who... More ≫

Description

This publication describes the health risks associated with working in extreme heat and cold situations, and suggests reasonable solutions for workplaces. It is intended primarily for people who work outdoors in areas such as road paving, construction, forestry, agriculture, ranching, oil and gas jobs, greenhouse or horticultural work, power line maintenance, and outdoor municipal work. This guidance may also be helpful to workplaces that have hot indoor environments such as kitchens, bakeries, pizza parlours, steam presses, laundries, or dry cleaning businesses. Cold indoor workplaces include those that have walk-in freezers, meat processing, or cold storage facilities.

Tags