All Resources

Quantification of area fugitive emissions at oil sands mines. Version 2.x

Description

This directive provides a standard minimum procedure for flux chamber measurements to quantify area fugitive greenhouse gas emissions from mine faces and tailings ponds at oil sands mines. This... More ≫

Description

This directive provides a standard minimum procedure for flux chamber measurements to quantify area fugitive greenhouse gas emissions from mine faces and tailings ponds at oil sands mines. This directive is to be applied for reporting under the Carbon Competitiveness Incentive Regulation, Technology Innovation and Emissions Reduction Regulation, and Specified Gas Reporting Regulation.

Tags

Quantification protocol for greenhouse gas emission reductions from pneumatic devices. Version 2.x

Description

This quantification protocol is written for the oil and gas industry where natural gas is used to provide pneumatic power for automated process control and operational devices. Devices that may be... More ≫

Description

This quantification protocol is written for the oil and gas industry where natural gas is used to provide pneumatic power for automated process control and operational devices. Devices that may be powered by natural gas include pressure controllers, temperature controllers, transducers, liquid level controllers, flow rate regulators and chemical pumps. The opportunity for generating carbon offsets arises from the direct and indirect reduction in greenhouse gases resulting from the conversion of instrument gas to instrument air in process control systems.

Tags

Quantification protocol for enhanced oil recovery. Version 2

Description

This quantification protocol is written for the oil and gas industry where CO2 is injected into an enhanced oil recovery scheme and emissions offset project. The opportunity for generating... More ≫

Description

This quantification protocol is written for the oil and gas industry where CO2 is injected into an enhanced oil recovery scheme and emissions offset project. The opportunity for generating emission offsets arises from the direct and indirect reduction in greenhouse gases resulting from the capture, transportation and injection and ultimate sequestration of CO2.

Tags

Quantification protocol for vent gas reduction : technology innovation and emissions reduction (TIER) regulation

Description

This quantification protocol is written for the oil and gas industry where methane that is normally vented is capture and either conserved or combusted to reduce greenhouse gas emissions. The... More ≫

Description

This quantification protocol is written for the oil and gas industry where methane that is normally vented is capture and either conserved or combusted to reduce greenhouse gas emissions. The protocol provides a methodology to quantify the greenhouse gas emission reductions from capturing vented methane. Since methane has a much higher global warming potential than carbon dioxide this protocol has the potential to enable project developers to achieve significant reductions and generate emission offsets.

Tags

Quantification protocol for biogas production and combustion

Description

This quantification protocol is written for those familiar with wastewater treatment processes and with the operation of anaerobic digesters and biogas utilization systems. It includes... More ≫

Description

This quantification protocol is written for those familiar with wastewater treatment processes and with the operation of anaerobic digesters and biogas utilization systems. It includes opportunities for generating emission offsets from both solid and liquid waste streams.

Tags

Standard for validation, verification and audit. Version 4.0

Description

This document outlines the requirements for validation, verification and audit under the Technology Innovation and Emissions Reduction Regulation.

Tags

Carbon offset emission factors handbook. Version 2.0

Description

The document outlines emission factors needed in calculating emission reductions under a government-approved emission offsets quantification protocol.

Tags

Specified Gas Emitters Regulation : 2015-2017 data

Description

This spreadsheet provides a summary of 2015-2017 data reported by facilities subject to the Specified Gas Emitters Regulation. The Regulation was passed in 2007 and expired December 31, 2017.... More ≫

Description

This spreadsheet provides a summary of 2015-2017 data reported by facilities subject to the Specified Gas Emitters Regulation. The Regulation was passed in 2007 and expired December 31, 2017. Emissions were reported in units of tonnes of carbon dioxide equivalents. Each facility was required to reduce its annual emissions intensity by a prescribed percentage target relative to its facility-specific approved baseline emissions intensity.

Tags

Alberta's proposed Technology Innovation and Emissions Reduction system : discussion document

Description

The Government of Alberta is proposing to replace the Carbon Competitiveness Incentive Regulation (CCIR) with a Technology Innovation and Emissions Reduction (TIER) system for Alberta’s large... More ≫

Description

The Government of Alberta is proposing to replace the Carbon Competitiveness Incentive Regulation (CCIR) with a Technology Innovation and Emissions Reduction (TIER) system for Alberta’s large industrial emitters, with a target effective date of Jan. 1, 2020. This document is intended to assist discussion around the options for development, transition and implementation of the TIER system. It outlines principles to guide the development and implementation of the TIER system, principles to guide the engagement process, and the engagement approach and scope.

Tags

Standard for establishing and assigning benchmarks. Version 2

Description

The purpose of this document is to assist persons responsible for facilities that are regulated by, or considering application to be regulated by, the Carbon Competitiveness Incentive Regulation.... More ≫

Description

The purpose of this document is to assist persons responsible for facilities that are regulated by, or considering application to be regulated by, the Carbon Competitiveness Incentive Regulation. The document outlines the methods for establishing and assigning emissions intensity benchmarks that apply to the production of goods and processes at regulated facilities. It also outlines criteria detailing opt-in eligibility and the application process for opt-in to the regulation. Additional information regarding details on emissions scope and coverage, tightening rate, review periods and the assignment of transition allocation benchmarks is also provided.

Tags