All Resources

Aerial Overview Surveys 2011 - Current

Description

Aerial overview surveys are carried out by observers in fixed-wing aircraft flying at appropriate safe heights above ground level over the forest canopy. Surveys cover extensive areas to detect as... More ≫

Description

Aerial overview surveys are carried out by observers in fixed-wing aircraft flying at appropriate safe heights above ground level over the forest canopy. Surveys cover extensive areas to detect as many new FHDA-caused disturbances as possible. Surveyors record locations, extent, severity, possible causative agent and host tree species involved in the disturbances. Aerial surveys are cost-effective means of obtaining forest health damaging agent (FHDA) caused disturbance data at the landscape level. These surveys help to manage forests by providing early detection of FHDAs and once detected, by monitoring their trends. Aerial surveys are carried out to record locations, extent and severity of new, FHDA-caused disturbances. changes to known FHDA disturbances for historical and evaluation purposes. background information needed for planning management actions. and, forest health data at the forest area, regional and provincial levels for reporting and inventory update. This dataset...

Tags

Mountain Pine Beetle Inventory 2011 - Current

Description

The mountain pine beetle (Dendroctonus ponderosae Hopkins, MPB) is native to western Canada. It attacks all pine including lodgepole, limber, whitebark and jack pine. Over the past 40 years the... More ≫

Description

The mountain pine beetle (Dendroctonus ponderosae Hopkins, MPB) is native to western Canada. It attacks all pine including lodgepole, limber, whitebark and jack pine. Over the past 40 years the range of mountain pine beetle has expanded, possibly due to changes in the area of climatically suitable habitat. Known Limitations: The areas surveyed each year can be different and therefore year over year comparisons may be difficult. the surveyors do not do ground truthing for all disturbances identified, therefore it is not guaranteed that all of the disturbances are caused by MPB. the surveyors do not necessarily map tree patches less than three red trees and therefore the dataset may not include all MPB killed trees. 'grey' attacked trees are not captured. the surveyors attempt to distinguish between 'new' faders and 'old' faders but the accuracy of this distinction is not guaranteed and therefore the data may reflect several years and several generations of MPB attack. Beetle year is...

Tags

Aerial Overview Surveys 1998 - 2010

Description

Aerial overview surveys are carried out by observers in fixed-wing aircraft flying at appropriate safe heights above ground level over the forest canopy. Surveys cover extensive areas to detect as... More ≫

Description

Aerial overview surveys are carried out by observers in fixed-wing aircraft flying at appropriate safe heights above ground level over the forest canopy. Surveys cover extensive areas to detect as many new FHDA-caused disturbances as possible. Surveyors record locations, extent, severity, possible causative agent and host tree species involved in the disturbances. Aerial surveys are cost-effective means of obtaining forest health damaging agent (FHDA) caused disturbance data at the landscape level. These surveys help to manage forests by providing early detection of FHDAs and once detected, by monitoring their trends. Aerial surveys are carried out to record locations, extent and severity of new, FHDA-caused disturbances. changes to known FHDA disturbances for historical and evaluation purposes. background information needed for planning management actions. and, forest health data at the forest area, regional and provincial levels for reporting and inventory update. This dataset...

Tags

Mountain Pine Beetle Inventory 1975 - 2010

Description

The mountain pine beetle (Dendroctonus ponderosae Hopkins, MPB) is native to western Canada. It attacks all pine including lodgepole, limber, whitebark and jack pine. Over the past 40 years the... More ≫

Description

The mountain pine beetle (Dendroctonus ponderosae Hopkins, MPB) is native to western Canada. It attacks all pine including lodgepole, limber, whitebark and jack pine. Over the past 40 years the range of mountain pine beetle has expanded, possibly due to changes in the area of climatically suitable habitat. Known Limitations: The areas surveyed each year can be different and therefore year over year comparisons may be difficult. the surveyors do not do ground truthing for all disturbances identified, therefore it is not guaranteed that all of the disturbances are caused by MPB. the surveyors do not necessarily map tree patches less than three red trees and therefore the dataset may not include all MPB killed trees. 'grey' attacked trees are not captured. the surveyors attempt to distinguish between 'new' faders and 'old' faders but the accuracy of this distinction is not guaranteed and therefore the data may reflect several years and several generations of MPB attack. Beetle year is...

Tags

Derived Ecosite Phase v2.0

Description

Derived Ecosite Phase (DEP) v2.0 is a digital and spatial representation of ecological sites and phases in those areas of Alberta where both Alberta Vegetation Inventory (AVI) and lidar are... More ≫

Description

Derived Ecosite Phase (DEP) v2.0 is a digital and spatial representation of ecological sites and phases in those areas of Alberta where both Alberta Vegetation Inventory (AVI) and lidar are available. The AVI is an imagery-based digital inventory developed to identify the type, extent and conditions of vegetation, where it exists and what changes are occurring. The most up-to-date ecological site phases can be found in the Ecological Site Guides. Guides are broken into individual Natural Subregions. See the Cross Reference Section for additional information. This dataset is produced for the Government of Alberta and is available to the general public. Please consult the Distribution Information of this metadata for the appropriate contact to acquire this dataset.This dataset covers the areas of Alberta where there is both AVI and lidar coverage (mainly in the Green Area). AVIE and lidar-derived slope position were created by the Forest Stewardship and Trade Branch, Forestry...

Tags

Fertilizer Expense Index 2001

Description

The data represents the relative expense of fertilizer and lime in the agricultural area of Alberta. It is an estimate of the degree to which agriculture may affect nutrient levels in surface and... More ≫

Description

The data represents the relative expense of fertilizer and lime in the agricultural area of Alberta. It is an estimate of the degree to which agriculture may affect nutrient levels in surface and groundwater. The classes shown on the map are ranked between 0 (lowest) and 1 (highest).Mapping the relative values of fertilizer expenses by SLC polygon area is useful as an indication of where more fertilizer is applied in the province and as a proxy indicator for crop production.It also suggests the relative agricultural intensity in various parts of the province. This resource was created in 2002 using ArcGIS.

Tags

Ground Water Quality Risk

Description

This map displays an assessment of groundwater quality risk for the agricultural area of Alberta. Agricultural activities that may have an impact on groundwater quality include livestock, crop... More ≫

Description

This map displays an assessment of groundwater quality risk for the agricultural area of Alberta. Agricultural activities that may have an impact on groundwater quality include livestock, crop production and agrochemical use. These activities along with the physical characteristics represented by aquifer vulnerability and available moisture were combined to produce this map. The classes shown on the map were ranked from 0 (lowest risk) to 1 (highest risk). This resource was created in 2005 using ArcGIS.

Tags

Cultivation Intensity Index 2001

Description

The data represents the relative cultivation intensity in the agricultural area of Alberta. Cultivation intensity refers to the frequency of cultivation associated with the following management... More ≫

Description

The data represents the relative cultivation intensity in the agricultural area of Alberta. Cultivation intensity refers to the frequency of cultivation associated with the following management systems: no till, conventional tillage and summerfallow. It is an estimate of the degree to which cultivation contributes to wind and water erosion. The classes shown on the map are ranked between 0 (lowest) and 1 (highest).This map was created in 2002 using ArcGIS.

Tags

Areal Extent of Wetlands

Description

The data represents the density of wetland habitat in the agricultural region of Alberta in 2002. Wetlands are depressional areas that are wet for a long enough period that the plant and animals... More ≫

Description

The data represents the density of wetland habitat in the agricultural region of Alberta in 2002. Wetlands are depressional areas that are wet for a long enough period that the plant and animals living in them are adapted to, and often dependent on, living in wet conditions for at least part of their life cycle. In drier areas of the province, wetlands tend to be more intermittent, while in wetter areas, wetlands tend to be more persistent. Topography also affects the occurrence of wetlands. Hummocky landscapes allow for pooling of water in depressions, while landscapes with longer slopes (e.g. the foothills) generally have better defined surface drainage patterns. A wetland in influenced by the interaction between the wet area, the wetland margin and upland area.Wetlands provide important habitat for waterfowl and many other types of wildlife. Wetlands reduce the impact of flooding, provide erosion control, purify water by removing sediment and nutrients, and contribute to...

Tags

Aquifer Vulnerability Index

Description

The Aquifer Vulnerability Index (AVI) is a method of assessing the vulnerability of aquifers to surface contaminants in Alberta. An aquifer is a geological formation that is permeable enough to... More ≫

Description

The Aquifer Vulnerability Index (AVI) is a method of assessing the vulnerability of aquifers to surface contaminants in Alberta. An aquifer is a geological formation that is permeable enough to transmit sufficient quantities of water to possible to support the development of water wells. In the assessment of aquifer vulnerability to potential contamination, the depth to the aquifer and the types of geological materials above them are considered. For example, aquifers closer to the surface overlain with pervious surface materials are more vulnerable to contaminants, as compared to aquifers found deeper and covered with a thick layer of impervious material. The AVI ratings indicate the potential of surficial materials to transmit water withy contaminants to the aquifer over a period of time. This data was created in 2002 using ArcGIS.

Tags