All Resources

Alberta industrial greenhouse gas compliance

Description

Each annual issue of this report summarizes information gathered from compliance reports submitted by regulated facilities under the Technology Innovation and Emissions Reduction Regulation.... More ≫

Description

Each annual issue of this report summarizes information gathered from compliance reports submitted by regulated facilities under the Technology Innovation and Emissions Reduction Regulation. Information contained in the report includes total regulated emissions, compliance position, and credit usage by sector, and a summary of historic compliance results from 2007 forward.

Tags

Quantification protocol for greenhouse gas emission reductions from pneumatic devices. Version 3.x

Description

This protocol is effective January 1, 2023 and must be used to quantify emission offsets generated in the 2023 vintage going forward. This quantification protocol is written for the oil and gas... More ≫

Description

This protocol is effective January 1, 2023 and must be used to quantify emission offsets generated in the 2023 vintage going forward. This quantification protocol is written for the oil and gas industry where natural gas is used to provide pneumatic power for automated process control and operational devices. Devices include pressure controllers, temperature controllers, transducers, liquid level controllers, flow rate regulators and chemical pumps. The opportunity for generating emission offsets arises from the direct and indirect reduction in greenhouse gases resulting from the conversion of instrument gas to instrument air in process control systems, conversion of pumps, and vent gas capture.

Tags

Quantification protocol for agricultural nitrous oxide emission reductions. Version 2.x

Description

The scope of this protocol is limited to on-farm reductions of emissions from nitrogen sources and fuel use associated with the management of synthetic fertilizer, manure fertilizer and crop... More ≫

Description

The scope of this protocol is limited to on-farm reductions of emissions from nitrogen sources and fuel use associated with the management of synthetic fertilizer, manure fertilizer and crop residues. Greenhouse gas (GHG) reductions associated with carbon sequestration in the soil and off-site emission reductions affected by the manufacture and distribution of nitrogen fertilizers are excluded from the protocol. The exclusion of off-site reductions of fertilizer manufacturing increases conservativeness in emission reduction calculations and limits the scope of quantification to those sources, sinks and/or reservoirs for which data are readily available.

Tags

Standard for greenhouse gas emission offset project developers. Version 3.x

Description

The Standard for Greenhouse Gas Emission Offset Project Developers has been released as one of a series of standards under Alberta's Technology, Innovation, and Emissions Reductions Regulation and... More ≫

Description

The Standard for Greenhouse Gas Emission Offset Project Developers has been released as one of a series of standards under Alberta's Technology, Innovation, and Emissions Reductions Regulation and outlines the requirements for project developers when developing an emission offset project.

Tags

Carbon offset emission factors handbook. Version 3.x

Description

The document outlines emission factors needed in calculating emission reductions under a government-approved emission offsets quantification protocol.

Tags

Quantification protocol for greenhouse gas emission reductions from pneumatic devices. Version 2.x

Description

This quantification protocol is written for the oil and gas industry where natural gas is used to provide pneumatic power for automated process control and operational devices. Devices that may be... More ≫

Description

This quantification protocol is written for the oil and gas industry where natural gas is used to provide pneumatic power for automated process control and operational devices. Devices that may be powered by natural gas include pressure controllers, temperature controllers, transducers, liquid level controllers, flow rate regulators and chemical pumps. The opportunity for generating carbon offsets arises from the direct and indirect reduction in greenhouse gases resulting from the conversion of instrument gas to instrument air in process control systems.

Tags

Quantification protocol for enhanced oil recovery. Version 2

Description

This quantification protocol is written for the oil and gas industry where CO2 is injected into an enhanced oil recovery scheme and emissions offset project. The opportunity for generating... More ≫

Description

This quantification protocol is written for the oil and gas industry where CO2 is injected into an enhanced oil recovery scheme and emissions offset project. The opportunity for generating emission offsets arises from the direct and indirect reduction in greenhouse gases resulting from the capture, transportation and injection and ultimate sequestration of CO2.

Tags

Specified Gas Emitters Regulation and Carbon Competitiveness Incentive Regulation results

Description

This document contains a table showing annual amounts of carbon offsets from 2007 to 2019 resulting from industry compliance with the Specified Gas Emitters Regulation and THE Carbon... More ≫

Description

This document contains a table showing annual amounts of carbon offsets from 2007 to 2019 resulting from industry compliance with the Specified Gas Emitters Regulation and THE Carbon Competitiveness Incentive Regulation.

Tags

Carbon offset emission factors handbook. Version 2.0

Description

The document outlines emission factors needed in calculating emission reductions under a government-approved emission offsets quantification protocol.

Tags

Specified Gas Emitters Regulation : 2015-2017 data

Description

This spreadsheet provides a summary of 2015-2017 data reported by facilities subject to the Specified Gas Emitters Regulation. The Regulation was passed in 2007 and expired December 31, 2017.... More ≫

Description

This spreadsheet provides a summary of 2015-2017 data reported by facilities subject to the Specified Gas Emitters Regulation. The Regulation was passed in 2007 and expired December 31, 2017. Emissions were reported in units of tonnes of carbon dioxide equivalents. Each facility was required to reduce its annual emissions intensity by a prescribed percentage target relative to its facility-specific approved baseline emissions intensity.

Tags