All Resources

Alberta Flood Mapping

Description

Flood maps are created by combining hydraulic model results with high-accuracy ground information. Field surveys and LiDAR remote sensing are used to collect river and floodplain elevations,... More ≫

Description

Flood maps are created by combining hydraulic model results with high-accuracy ground information. Field surveys and LiDAR remote sensing are used to collect river and floodplain elevations, channel cross section data, bridge and culvert information, and flood berm details. A hydrology assessment using recorded and historic flow measurements is typically used to estimate river flows for a wide range of possible open water floods with different chances of occurring each year. When appropriate, an ice jam frequency analysis is undertaken. All this information is used to build a hydraulic model of a river system, which is calibrated using highwater marks and aerial imagery from past floods to ensure that results for the different flood flows being mapped are reasonable. Flood inundation maps show areas at risk for different sized floods, including ice jam floods in some communities. These maps also identify areas that could be flooded if berms or other flood control structures fail and...

Tags

82O Calgary - Provincial Access/Topographic Map Series

Description

This series of 1:250 000 scale colour maps covers the provincial extent of Alberta and is comprised of 50 maps that are individually named using the National Topographic System (NTS) map sheet... More ≫

Description

This series of 1:250 000 scale colour maps covers the provincial extent of Alberta and is comprised of 50 maps that are individually named using the National Topographic System (NTS) map sheet identifier. These maps display: Alberta Township System (ATS), contours (50m intervals), major hydrographic features, municipalities, major roads, railways, and select geo-administrative features (parks, reserves, etc.).

Tags

Ministerial Order No. 10/2019 [Advanced Education]

Description

Appoints Mohammad Habibabadi, the graduate student nominated by the council of the graduate students’ association, as a member of The Governors of The University of Calgary for a term to expire on... More ≫

Description

Appoints Mohammad Habibabadi, the graduate student nominated by the council of the graduate students’ association, as a member of The Governors of The University of Calgary for a term to expire on April 30, 2020. Rescinds M.O. 15/2018.

Tags

Ministerial Order No. 12/2019 [Advanced Education]

Description

Appoints Tavis Campbell, the member of the academic staff of the university nominated by the academic staff association, as a member of The Governors of The University of Calgary for a term to... More ≫

Description

Appoints Tavis Campbell, the member of the academic staff of the university nominated by the academic staff association, as a member of The Governors of The University of Calgary for a term to expire on July 31, 2022. Rescinds M.O. 32/2018.

Tags

Ministerial Order No. 110/2018 [Economic Development and Trade]

Description

Continue the appointment of Nicole Goehring, MLA, Edmonton-Castle Downs, as an Alberta Representative to the Delegate Council of the PNWER. Appoint Graham Sucha, MLA Calgary-Shaw as an Alberta... More ≫

Description

Continue the appointment of Nicole Goehring, MLA, Edmonton-Castle Downs, as an Alberta Representative to the Delegate Council of the PNWER. Appoint Graham Sucha, MLA Calgary-Shaw as an Alberta Representative to PNWER.

Tags

Compilation of In Situ Stress Data from Alberta and Northeastern British Columbia (tabular data, tab delimited)

Description

This digital dataset is the compilation of an analysis of the in situ stress regime in several regions of Alberta and northeastern British Columbia conducted by Dr. Sebastian Bell under a contract... More ≫

Description

This digital dataset is the compilation of an analysis of the in situ stress regime in several regions of Alberta and northeastern British Columbia conducted by Dr. Sebastian Bell under a contract with the Alberta Geological Survey from 1999 to 2004. The dataset includes both new and previously published estimates for vertical stress gradients, minimum horizontal stress gradients, and stress orientation. Understanding the state of stress in the subsurface has always been important in the development of energy resources. The recent development of unconventional oil sand and low permeability hydrocarbon deposits, waste fluid disposal, greenhouse gas sequestration, and potential geothermal energy extraction all require knowledge of the state of stress to operate safely and economically. A lack of understanding of the state of stress in a given project area has the potential to negatively affect the economics of such projects and may expose operators to increased liabilities. Regional-...

Tags

Surface water chemistry data from the Athabasca Oil sands in-situ area - tabular data.

Description

The dataset contains the results of analyses of surface water samples collected by AGS in the summer of 1999. Three lakes, three creeks, one stream and two rivers were sampled as part of a water... More ≫

Description

The dataset contains the results of analyses of surface water samples collected by AGS in the summer of 1999. Three lakes, three creeks, one stream and two rivers were sampled as part of a water sampling program carried out by AGS in the Athabasca Oil Sands in-situ area of Alberta. This area extends from approximately 55.34 degrees north latitude to 55.96 degrees north latitude, and 110.5 degrees west longitude to 111.8 degrees west longitude. The datum is NAD83. The dataset contains information on laboratory measured pH and conductivity, major, minor and trace element concentrations, as well as stable isotope ratio values of oxygen and hydrogen. AGS staff collected the samples using a discrete sampling method. The sample bottle was dipped into the surface water body and partially filled with water, rinsed and the water was discarded. The bottle was then filled and capped. The sample was subsequently filtered on site using a 0.45 micron filter. A sample was acidified for minor and...

Tags

Surface materials of the Calgary urban area - geological contacts (GIS data, line features)

Description

This is a GIS dataset containing digitized and attributed line features from scanned Alberta Geological Survey Maps 201, 202, 203 and 204. The data show the surficial geology of the Calgary urban... More ≫

Description

This is a GIS dataset containing digitized and attributed line features from scanned Alberta Geological Survey Maps 201, 202, 203 and 204. The data show the surficial geology of the Calgary urban area (NTS areas 82O/01, 82P/04, 82J/16 and 82I/13) and are attributed with geological contact boundaries defined and inferred as shown on the maps. The data from the four maps are presented in a single line layer.

Tags

Thickness of Quaternary and Neogene Sediments in the Edmonton-Calgary Corridor (GIS data, ASCII grid format)

Description

This GIS dataset depicts the drift thickness in the Edmonton-Calgary corridor based on water-well litholog data and bedrock outcrop locations. We used well data from an internal Edmonton-Calgary... More ≫

Description

This GIS dataset depicts the drift thickness in the Edmonton-Calgary corridor based on water-well litholog data and bedrock outcrop locations. We used well data from an internal Edmonton-Calgary corridor geological mapping database. This thickness map was generated to assist in building a geological model for the region. The sediment thickness was generated by subtracting the bedrock topography surface from the 60 m Shuttle Radar Topography Mission v. 2 digital elevation model.

Tags

Bedrock Topography of the Edmonton-Calgary Corridor, Alberta (GIS data, ASCII grid format)

Description

This GIS dataset depicts the structural bedrock top surface in the Edmonton-Calgary Corridor based on water-well litholog data, including bedrock outcrop locations. We sourced the well data from... More ≫

Description

This GIS dataset depicts the structural bedrock top surface in the Edmonton-Calgary Corridor based on water-well litholog data, including bedrock outcrop locations. We sourced the well data from an internal Edmonton-Calgary Corridor geological mapping database. This surface provides a geological model for the region. These data comprise the raster surface of Alberta Geological Survey Map 549, Bedrock Topography of the Edmonton-Calgary Corridor, Alberta.

Tags