All Resources

Quantification protocol for agricultural nitrous oxide emission reductions. Draft version 1.1

Description

The scope of this protocol is limited to on-farm reductions of emissions from nitrogen sources and fuel use associated with the management of synthetic fertilizer, manure fertilizer and crop... More ≫

Description

The scope of this protocol is limited to on-farm reductions of emissions from nitrogen sources and fuel use associated with the management of synthetic fertilizer, manure fertilizer and crop residues. Greenhouse gas (GHG) reductions associated with carbon sequestration in the soil and off-site emission reductions affected by the manufacture and distribution of nitrogen fertilizers are excluded from the protocol. The exclusion of off-site reductions of fertilizer manufacturing increases conservativeness in emission reduction calculations and limits the scope of quantification to those sources, sinks and/or reservoirs for which data are readily available.

Tags

Quantification protocol for biofuel production and usage. Version 2.0

Description

Written for the biofuel production facility or project developer, this protocol quantifies the emission reductions from the avoidance of fossil fuel consumption when the fossil fuel is replaced by... More ≫

Description

Written for the biofuel production facility or project developer, this protocol quantifies the emission reductions from the avoidance of fossil fuel consumption when the fossil fuel is replaced by biofuels on an equivalent energy potential basis. The protocol also includes reductions in greenhouse gas (GHG) emissions due to any heat/power production and electricity generation related to the process, and from the avoidance of landfilling any materials which may be diverted for conversion to biofuel. The protocol is not intended to be prescriptive, but instead serve as a generic “recipe” for biofuel facility owners and operators to follow in order to meet measurement, monitoring and GHG quantification requirements.

Tags

Technical guidance for completing specified gas compliance reports. Version 7.0

Description

The purpose of this document is to assist facilities regulated under the Specified Gas Emitters Regulation in completing annual compliance reports and to provide information about the compliance... More ≫

Description

The purpose of this document is to assist facilities regulated under the Specified Gas Emitters Regulation in completing annual compliance reports and to provide information about the compliance options available to facilities that are unable to meet their emissions reduction targets through facility level improvements. This document should be applied when completing compliance reporting for the 2013 emissions year.

Tags

Quantification protocol for distributed renewable energy generation. Version 1.0

Description

This protocol specifically addresses grid connected wind and solar generation projects with a rated electrical capacity of less than 1 MW located at the consumer end of the electric distribution... More ≫

Description

This protocol specifically addresses grid connected wind and solar generation projects with a rated electrical capacity of less than 1 MW located at the consumer end of the electric distribution system. Individual projects will yield small volume emissions reductions that cannot be processed as stand-alone offset projects in the Alberta Offset System. The methodology provided in this protocol is for aggregated, distributed renewable electricity projects. Familiarity with and general understanding of distributed energy system operations is required.

Tags

Technical guidance for completing specified gas baseline emission intensity applications. Version 4.0

Description

The purpose of this document is to assist regulated facilities under the Specified Gas Emitters Regulation with the completion of Baseline Emissions Intensity Applications. A facility's stated... More ≫

Description

The purpose of this document is to assist regulated facilities under the Specified Gas Emitters Regulation with the completion of Baseline Emissions Intensity Applications. A facility's stated baseline emissions intensity (BEI) value must be representative of the facility's normal operating conditions. If the baseline period is not representative of that facility's standard operating conditions, the Certifying Official must contact Alberta Environment and Sustainable Resource Development to discuss an adjusted baseline period. More information on alternate baseline periods is available in section 3.2 of this guidance document.

Tags

Annual summary of specified gas emitters regulation

Description

2009 was the second full year of operations for the Specified Gas Emitters Regulation. This report details the results for 2009 and for the previous program periods.

Tags