All Resources

Soil Groups

Description

This map displays the distribution of the main soil types found within the province of Alberta. The distribution pattern of soils in Alberta is strongly linked to climate and parent materials.... More ≫

Description

This map displays the distribution of the main soil types found within the province of Alberta. The distribution pattern of soils in Alberta is strongly linked to climate and parent materials. Climate affects the location of different soil groups. The driest area in southeastern Alberta is represented by the presence of Brown Chernozems. As one proceeds north and west, the soils and associated vegetation reflect the increase in available moisture.In Alberta, Organic soils generally occur in association with Luvisolic soils. These soils form under wet conditions where the organic layer (greater than 30% organic matter) accumulates faster than it decomposes. The organic layer varies in thickness from 40 to 160+ cm, and under natural conditions, the water table is at or near the surface. In some areas of the province, Organic soils may be artificially drained and used for agricultural production. This resource was created in 2002 using ArcGIS.

Tags

Wind Erosion Risk

Description

This map displays the risk of soil degradation by wind in the agricultural region of Alberta. Wind erosion is a concern because it reduces soil quality by removing soil nutrients, smaller soil... More ≫

Description

This map displays the risk of soil degradation by wind in the agricultural region of Alberta. Wind erosion is a concern because it reduces soil quality by removing soil nutrients, smaller soil particles and organic matter. Wind erosion can reduce air quality during extreme erosion events and also reduce water quality if eroded particles drift into streams and lakes. The map uses five classes to describe the wind erosion risk on bare, unprotected mineral soil: negligible, low, moderate, high and severe. This resource was created using ArcGIS. It was originally published as a print map in 1989.

Tags

Cultivation Intensity Index 2001

Description

The data represents the relative cultivation intensity in the agricultural area of Alberta. Cultivation intensity refers to the frequency of cultivation associated with the following management... More ≫

Description

The data represents the relative cultivation intensity in the agricultural area of Alberta. Cultivation intensity refers to the frequency of cultivation associated with the following management systems: no till, conventional tillage and summerfallow. It is an estimate of the degree to which cultivation contributes to wind and water erosion. The classes shown on the map are ranked between 0 (lowest) and 1 (highest).This map was created in 2002 using ArcGIS.

Tags

Surface Water Quality Risk

Description

This map displays an assessment of surface water quality risk for the agricultural area of Alberta. Agricultural activities that may have an impact on surface water quality, including livestock,... More ≫

Description

This map displays an assessment of surface water quality risk for the agricultural area of Alberta. Agricultural activities that may have an impact on surface water quality, including livestock, crop production and agrochemical use, were identified and used to produce this map. The classes shown on the map were ranked from 0 (lowest risk) to 1 (highest risk).This resource was created in 2002 using ArcGIS.

Tags

Frost Free Period 1971-2000

Description

The data represents the frost-free period in Alberta over the 30-year period from 1971 to 2000. A 30-year period is used to describe the present climate since it is enough time to filter out... More ≫

Description

The data represents the frost-free period in Alberta over the 30-year period from 1971 to 2000. A 30-year period is used to describe the present climate since it is enough time to filter out short-term fluctuations but is not dominated by any long-term trend in the climate. The frost-free period is the number of days between the last date of 00C in the spring and the first date of 00C in the fall. Frost free periods in Alberta vary from 125 days in the south to less than 85 days in higher elevation, non-agricultural areas.The frost-free period is presented as days above 0&deg.C in the following classes: less than 85, 85 to 95, 95 to 105, 105 to 115, 115 to 125 and greater than 125. This resource was created using ArcGIS.

Tags

Annual Total Precipitation 1971-2000

Description

The data represents the annual total precipitation in Alberta over the 30-year period from 1971 to 2000. A 30-year period is used to describe the present climate since it is enough time to filter... More ≫

Description

The data represents the annual total precipitation in Alberta over the 30-year period from 1971 to 2000. A 30-year period is used to describe the present climate since it is enough time to filter our short-term fluctuations but is not dominated by any long-term trend in the climate. Annual total precipitation refers to rain, snow and other forms of moisture such as hail. Annual precipitation is greatest in the mountains and decreases at lower elevations. In the agricultural areas of the province, 50 to60 percent of annual precipitation generally occurs during the growing season, mostly as rain.Precipitation in any month can be extremely variable with the variability of precipitation being greater in southern Alberta than in the Peace River Region and central Alberta. However, long-term (30-year) data provides a reliable indication of what to expect in any given location. Climate information is used as a long-term planning tool, in selecting a location for a farm or planning a...

Tags

Chemical Expense Index 2001

Description

The data represents the relative expense of farm chemicals (herbicides, insecticides and fungicides) in the agricultural area of Alberta. It is an estimate of the degree to which crop production... More ≫

Description

The data represents the relative expense of farm chemicals (herbicides, insecticides and fungicides) in the agricultural area of Alberta. It is an estimate of the degree to which crop production agriculture may contribute to surface or groundwater contamination.Agriculture production that makes greater use of herbicides, insecticides and pesticides in generally considered more intensive. Presenting the relative farm chemical expenses by SLC polygons reveals where the most intensive agricultural production in the province occurs. Chemical use is part of an equation to determine a measure of surface water quality risk. If an area is known to have certain risk factors that would affect not only surface, but groundwater quality as well, a higher chemical expense index ranking in that same area may be of concern. Where risks of surface or groundwater contamination exist, environmental farm planning can help to minimize them.

Tags

Manure Production Index 2001

Description

The data represents the relative amount of manure production in the agricultural area of Alberta. It is an estimate of the degree to which livestock production may contribute to nutrient loading,... More ≫

Description

The data represents the relative amount of manure production in the agricultural area of Alberta. It is an estimate of the degree to which livestock production may contribute to nutrient loading, pathogens and odour. The classes shown on the map are ranked between 0 (lowest) and 1 (highest). This resource was created in 2002 using ArcGIS.

Tags

Soil Texture

Description

This map illustrates the distribution of soil parent material textures in the agricultural region of Alberta. Soil texture is defined by the relative proportions of the sand, silt and clay... More ≫

Description

This map illustrates the distribution of soil parent material textures in the agricultural region of Alberta. Soil texture is defined by the relative proportions of the sand, silt and clay particles present. Soil textures are identified by classes using the Soil Texture Triangle illustrated below. The Soil Texture Triangle identifies the textural class of a soil at the intersection of the percent sand (x-axis) and the percent clay (y-axis). The percent silt of the soil is the remainder to add up to 100 percent. This resource was created in 2002 using ArcGIS.

Tags

Solonetzic Soils

Description

This map displays the distribution of Solonetzic soils in the agricultural region of Alberta. Solonetzic soils have developed on saline parent material that is high in sodium and have a... More ≫

Description

This map displays the distribution of Solonetzic soils in the agricultural region of Alberta. Solonetzic soils have developed on saline parent material that is high in sodium and have a characteristic hardpan layer that has formed in the subsoil. This hardpan is very hard when dry and has low permeability when wet. This results in restricted root and water penetration that may limit the productivity of these soils. Solonetzic soils occur in association with Chernozemic soils and, to a lesser extent, with Luvisolic soils.The Agricultural Region of Alberta Soil Inventory Database (AGRASID) soil landscape polygons that contained soils belonging to the Solonetzic Order were identified, and the areal extent of these soils was represented as a percentage of the total area using the following classes: greater than 30, 10 to 30 and less than 10. This resource was created in 2002 using ArcGIS.

Tags