All Resources

Industrial Heartland - Designated Industrial Zone Boundaries

Description

The dataset was developed to provide geographic guide to better understand the boundaries of the Industrial Heartland - Designated Industrial Zone (IH-DIZ). The IH-DIZ industrial zoned land... More ≫

Description

The dataset was developed to provide geographic guide to better understand the boundaries of the Industrial Heartland - Designated Industrial Zone (IH-DIZ). The IH-DIZ industrial zoned land extends into 5 different municipalities, including: Approx. 533 km2 within the City of Fort Saskatchewan and the Counties of Lamont, Strathcona and Sturgeon. Approx. 49 km2 in the City of Edmonton, which is the industrial area known as the Edmonton Energy and Technology Park.

Tags

Cold Lake Sub-Regional Plan Spatial Data

Description

Sub-regional plans support working landscapes that provide economic opportunities and maintain healthy landscapes by outlining management approaches and requirements for development and human... More ≫

Description

Sub-regional plans support working landscapes that provide economic opportunities and maintain healthy landscapes by outlining management approaches and requirements for development and human footprint restoration. These plans enable public lands to support the interests of all Albertans, including Indigenous peoples, for the present and into the future. The Cold Lake Sub-Regional Plan Spatial Data dataset contains spatial data that can be used for planning as described within the Cold Lake Sub-regional Plan (2022). The following datasets are available: Cold Lake Watercourse/Waterbody Setbacks, and Cold Lake Recreational Management Areas.

Tags

Alberta Vegetation Inventory (AVI) Crown

Description

The Alberta Vegetation Inventory (AVI) is a photo-based digital inventory developed to identify the type, extent and conditions of vegetation, where it exists and what changes are occurring. This... More ≫

Description

The Alberta Vegetation Inventory (AVI) is a photo-based digital inventory developed to identify the type, extent and conditions of vegetation, where it exists and what changes are occurring. This dataset consolidates all available AVI into a single feature class.This dataset is produced for the Government of Alberta and is available to the general public.

Tags

Alberta Vegetation Inventory (AVI) Crown Post-Inventory Harvest Areas

Description

The purpose of this dataset is to identify areas harvested after the date of the inventory. The Forest Stewardship and Trade Branch is responsible for the creation and maintenance of these... More ≫

Description

The purpose of this dataset is to identify areas harvested after the date of the inventory. The Forest Stewardship and Trade Branch is responsible for the creation and maintenance of these boundaries for Crown-managed Forest Management Units. This dataset is produced for the Government of Alberta and is available to the general public.

Tags

Derived Ecosite Phase v2.0

Description

Derived Ecosite Phase (DEP) v2.0 is a digital and spatial representation of ecological sites and phases in those areas of Alberta where both Alberta Vegetation Inventory (AVI) and lidar are... More ≫

Description

Derived Ecosite Phase (DEP) v2.0 is a digital and spatial representation of ecological sites and phases in those areas of Alberta where both Alberta Vegetation Inventory (AVI) and lidar are available. The AVI is an imagery-based digital inventory developed to identify the type, extent and conditions of vegetation, where it exists and what changes are occurring. The most up-to-date ecological site phases can be found in the Ecological Site Guides. Guides are broken into individual Natural Subregions. See the Cross Reference Section for additional information. This dataset is produced for the Government of Alberta and is available to the general public. Please consult the Distribution Information of this metadata for the appropriate contact to acquire this dataset.This dataset covers the areas of Alberta where there is both AVI and lidar coverage (mainly in the Green Area). AVIE and lidar-derived slope position were created by the Forest Stewardship and Trade Branch, Forestry...

Tags

Air Quality Risk

Description

The data, created in ArcGIS, represents an assessment of air quality risk for the agricultural area of Alberta in 2005. Agricultural activities that may have some influence on air quality manure... More ≫

Description

The data, created in ArcGIS, represents an assessment of air quality risk for the agricultural area of Alberta in 2005. Agricultural activities that may have some influence on air quality manure production (odour) and cultivation intensity (particulate matter). The airsheds of the agricultural region of Alberta are considered to be uniform in their physical susceptibility to risk from agricultural activities. Air quality risk is a useful measure for those concerned about health, safety and nuisance issues related the quality of air in agricultural areas. Awareness of where agricultural activities related to livestock production and intensive cultivation are located, may be useful for people with health or nuisance related concerns. Blowing soil can cause respiratory problems and can reduce visibility on roads and highways. Dust from farm traffic can be a concern during peak agricultural activity, such as harvesting or manure hauling. Frequent strong odours can be unpleasant nuisance...

Tags

Manure Production Index 2001

Description

The data represents the relative amount of manure production in the agricultural area of Alberta. It is an estimate of the degree to which livestock production may contribute to nutrient loading,... More ≫

Description

The data represents the relative amount of manure production in the agricultural area of Alberta. It is an estimate of the degree to which livestock production may contribute to nutrient loading, pathogens and odour. The classes shown on the map are ranked between 0 (lowest) and 1 (highest). This resource was created in 2002 using ArcGIS.

Tags

Frost Free Period 1971-2000

Description

The data represents the frost-free period in Alberta over the 30-year period from 1971 to 2000. A 30-year period is used to describe the present climate since it is enough time to filter out... More ≫

Description

The data represents the frost-free period in Alberta over the 30-year period from 1971 to 2000. A 30-year period is used to describe the present climate since it is enough time to filter out short-term fluctuations but is not dominated by any long-term trend in the climate. The frost-free period is the number of days between the last date of 00C in the spring and the first date of 00C in the fall. Frost free periods in Alberta vary from 125 days in the south to less than 85 days in higher elevation, non-agricultural areas.The frost-free period is presented as days above 0&deg.C in the following classes: less than 85, 85 to 95, 95 to 105, 105 to 115, 115 to 125 and greater than 125. This resource was created using ArcGIS.

Tags

Aquifer Vulnerability Index

Description

The Aquifer Vulnerability Index (AVI) is a method of assessing the vulnerability of aquifers to surface contaminants in Alberta. An aquifer is a geological formation that is permeable enough to... More ≫

Description

The Aquifer Vulnerability Index (AVI) is a method of assessing the vulnerability of aquifers to surface contaminants in Alberta. An aquifer is a geological formation that is permeable enough to transmit sufficient quantities of water to possible to support the development of water wells. In the assessment of aquifer vulnerability to potential contamination, the depth to the aquifer and the types of geological materials above them are considered. For example, aquifers closer to the surface overlain with pervious surface materials are more vulnerable to contaminants, as compared to aquifers found deeper and covered with a thick layer of impervious material. The AVI ratings indicate the potential of surficial materials to transmit water withy contaminants to the aquifer over a period of time. This data was created in 2002 using ArcGIS.

Tags

Solonetzic Soils

Description

This map displays the distribution of Solonetzic soils in the agricultural region of Alberta. Solonetzic soils have developed on saline parent material that is high in sodium and have a... More ≫

Description

This map displays the distribution of Solonetzic soils in the agricultural region of Alberta. Solonetzic soils have developed on saline parent material that is high in sodium and have a characteristic hardpan layer that has formed in the subsoil. This hardpan is very hard when dry and has low permeability when wet. This results in restricted root and water penetration that may limit the productivity of these soils. Solonetzic soils occur in association with Chernozemic soils and, to a lesser extent, with Luvisolic soils.The Agricultural Region of Alberta Soil Inventory Database (AGRASID) soil landscape polygons that contained soils belonging to the Solonetzic Order were identified, and the areal extent of these soils was represented as a percentage of the total area using the following classes: greater than 30, 10 to 30 and less than 10. This resource was created in 2002 using ArcGIS.

Tags