All Resources

Crown Land Reservations

Description

A Crown land reservation is a tool under Section 18(c) of the Public Lands Act, to identify a management intent that will inform and provide direction to potential land users and regulatory bodies... More ≫

Description

A Crown land reservation is a tool under Section 18(c) of the Public Lands Act, to identify a management intent that will inform and provide direction to potential land users and regulatory bodies as authorized under the Public Lands Act. A reservation is not a disposition, does not grant any rights to public land or rights to access or occupy public land or rights to the resources on the land or under it. The Crown Land Reservations dataset displays reservations under application or active with their associated data attributes allowing users to view and access existing or proposed reservation information that could influence their application if a proposed activity intersects. More information can be found at www.alberta.ca/land-use-reservation-program.aspx

Tags

Project Returns for Riparian Area Assessment of the Swan River Watershed

Description

The Riparian Areas Assessment of the Swan River Watershed focused on assessing riparian habitat along creek, stream and river shorelines. This dataset was created for the Lesser Slave Water... More ≫

Description

The Riparian Areas Assessment of the Swan River Watershed focused on assessing riparian habitat along creek, stream and river shorelines. This dataset was created for the Lesser Slave Water Council as a part of a large scale riparian area assessment in Alberta. The overall goal of this project was to quantify and characterize the riparian habitat management in the Lesser Slave Lake watershed by assessing riparian areas along approximately 582 km of shoreline. The riparian areas that were assessed were located within the Swan River watershed (HUC 8) and included the left and right banks of the Swan, Moosehorn and Inverness Rivers. This study created a recent land cover layer within 50 m of selected shorelines and use this layer to assess the intactness of riparian areas along major waterbodies. It also provided guidance on how the results from the intactness assessments can be used to target conservation and restoration efforts within along the shorelines that were assessed as part...

Tags

Alberta Flood Hazard Identification Program Mapping

Description

Flood studies include detailed engineering reports and flood maps. The engineering reports are typically technical in nature and document the data, assumptions, and results of the hydrologic and... More ≫

Description

Flood studies include detailed engineering reports and flood maps. The engineering reports are typically technical in nature and document the data, assumptions, and results of the hydrologic and hydraulic analyses required to create flood maps. Flood maps are created by combining hydraulic model results for different sized floods with high-accuracy ground information. Flood maps identify where water will flow during a flood, and what land could be flooded during different sized floods. Most flood maps focus on floods caused by high river flows when water escapes the river channel, most often experienced in spring or following summer rainstorms, but they can also show areas at risk from ice jam floods or document the extent of historic floods.Flood inundation maps show areas at risk for different sized floods, including ice jam floods in some communities, and identify areas protected by flood berms. Because they map a wide range of floods, they are most often used for emergency...

Tags

Native Cover Indicator for Alberta

Description

Alberta Environment and Protected Areas and the Alberta Biodiversity Monitoring Institute (ABMI) jointly developed a Native Cover indicator for the province of Alberta. Native cover is defined as... More ≫

Description

Alberta Environment and Protected Areas and the Alberta Biodiversity Monitoring Institute (ABMI) jointly developed a Native Cover indicator for the province of Alberta. Native cover is defined as an area that is free of visible anthropogenic alteration (human footprint). There are two types of native cover: aquatic and wetland native cover (AWNC) and terrestrial native cover (TNC). AWNC represents the amount of aquatic habitat, including bogs, fens, swamps, marshes, open water, and riparian areas that are free of visible human footprint. while TNC represents the amount of upland (non-aquatic) habitat free of visible human footprint. AWNC and TNC conditions were calculated for all Hydrological Unit Code 8 (HUC 8) watersheds in Alberta for 2010, 2018, 2019, 2020 and 2021 using four datasets: the Wetland Inventory and Human Footprint Inventories created and maintained by the Alberta Biodiversity Monitoring Institute. and the Lotic Riparian – Digital Elevation Model (DEM) Derived...

Tags

Interior Habitat Indicator for Alberta

Description

Alberta Environment and Protected Areas developed an Interior habitat indicator for the province of Alberta. The indicator is the percentage area outside of a set distance from human footprint,... More ≫

Description

Alberta Environment and Protected Areas developed an Interior habitat indicator for the province of Alberta. The indicator is the percentage area outside of a set distance from human footprint, and can be calculated for the entire province or a specific area where human footprint data are available. This dataset provides values for all Hydrologic Unit Code 8 (HUC 8) watersheds in Alberta for 2010, 2014, 2016 and 2018. The distance at which an area was considered interior habitat was estimated using rounded buffers from the edges of the wall-to-wall Human Footprint Inventories produced by the Alberta Biodiversity Monitoring Institute (ABMI).

Tags

Critical Habitat of Aquatic Species at Risk

Description

Critical habitat is identified for species listed as Endangered or Threatened under the federal Species at Risk Act (SARA) and where federal critical habitat protection orders are in effect.... More ≫

Description

Critical habitat is identified for species listed as Endangered or Threatened under the federal Species at Risk Act (SARA) and where federal critical habitat protection orders are in effect. Fisheries and Oceans Canada (DFO) is the responsible authority for the protection, recovery and conservation of all listed aquatic species at risk in Canada. Critical habitat is defined as the habitat that is necessary for the survival or recovery of a listed wildlife species and that is identified as such in the recovery strategy or action plan for the species (https://www.canada.ca/en/environment-climate-change/services/species-risk-public-registry.html). SARA makes it illegal to destroy any part of the critical habitat of a listed species and may impose restrictions on development and construction. Species in this layer have federal protection of critical habitat under a Critical Habitat Order pursuant to subsections 58(4) and (5) of SARA, which brings into force the subsection 58(1)...

Tags

Landscape Connectivity Indicator

Description

Alberta Environment and Protected Areas and the Alberta Biodiversity Monitoring Institute (ABMI) jointly developed a Landscape Connectivity indicator for the province of Alberta. An Equivalent... More ≫

Description

Alberta Environment and Protected Areas and the Alberta Biodiversity Monitoring Institute (ABMI) jointly developed a Landscape Connectivity indicator for the province of Alberta. An Equivalent Connected Area index was selected to measure landscape connectivity and assess changes in connectivity over time. The indicator accounts for three broad land cover types: Upland Forest, Lowland Forest and Grass-Shrub. Landscape connectivity for the three land cover types, and an aggregated value, were calculated for all Hydrological Unit Code 8 (HUC 8) watersheds in Alberta for 2010, 2018, 2019, 2020 and 2021 using four GIS layers: the Human Footprint Inventories created and maintained by the ABMI through the Alberta Human Footprint Monitoring Program, the Wall-to-Wall Vegetation Layer Including “Backfilled” Vegetation created and maintained by the ABMI. the wildlife crossing locations in National Parks provided by Parks Canada, and the Hierarchical Watershed Boundaries of Alberta created and...

Tags

Feral Horse Minimum Count

Description

This dataset provides the point locations of horse bands as they were observed during annual aerial surveys. Equine Management Zones are surveyed using a helicopter and horses observed on the... More ≫

Description

This dataset provides the point locations of horse bands as they were observed during annual aerial surveys. Equine Management Zones are surveyed using a helicopter and horses observed on the landscape during minimum count surveys are reported. Data is stored in file geodatabase, feature class format with associated attributes, meaning each point has a number of horses observed and age class. This dataset simply reports the horses counted on the landscape at one snapshot in time. This data also depicts the flight track flown during the annual aerial minimum counts. Surveys are flown by helicopter once per year when suitable conditions permit. Areas are typically flown by grid pattern within high density areas and over known horse locations. In low density areas, preferred habitats are flown. For additional methodology information and results from prior years please visit https://www.alberta.ca/feral-horse-management.aspx

Tags

Wildlife Management Unit Biologist Contact Boundaries

Description

The Wildlife Management Unit Biologist Contact Boundaries dataset is comprised of all the polygons that represent the Wildlife Management Unit Biologist Contact Boundaries within the Province of... More ≫

Description

The Wildlife Management Unit Biologist Contact Boundaries dataset is comprised of all the polygons that represent the Wildlife Management Unit Biologist Contact Boundaries within the Province of Alberta. The dataset is to help determine which Biologist is responsible for each Wildlife Management Unit. Please refer to the metadata included with the data for full entity attribute information.

Tags

Lands, Ecosystems, and Conservation Unit Contact Boundaries

Description

Under the Recreation, Ecosystems, and Lands Program, The Lands, Ecosystems, and Conservation Unit Contact Boundaries dataset is comprised of all the polygons that represent the Lands, Ecosystems,... More ≫

Description

Under the Recreation, Ecosystems, and Lands Program, The Lands, Ecosystems, and Conservation Unit Contact Boundaries dataset is comprised of all the polygons that represent the Lands, Ecosystems, and Conservation districts of Alberta and who to contact for information within that district. The dataset is to help Government of Alberta Staff and external consultants to determine which Biologist is responsible for and has authority over each region.

Tags