All Resources

Bedrock Topography of Alberta (gridded data, ASCII format)

Description

The bedrock topography of Alberta is the surface of the top of Upper Cretaceous and Paleogene bedrock, and reveals geomorphic features created by Paleogene to Recent river systems and Quaternary... More ≫

Description

The bedrock topography of Alberta is the surface of the top of Upper Cretaceous and Paleogene bedrock, and reveals geomorphic features created by Paleogene to Recent river systems and Quaternary glaciation. This grid is a computer-generated geostatistical model of the bedrock topography of Alberta using previously published information from Alberta Geological Survey (AGS) maps and reports, as well as new data. The quality of this data has been assessed and then a quality-weighting approach was applied to the dataset prior to interpolation. The surface was modelled using a 500m x 500m grid cell spacing, and as such should not be used for local scale studies. This grid represents the surface portrayed in AGS Map 602, Bedrock Topography of Alberta, and this grid will continue to be updated as part of the Alberta Geological Framework project. Explanatory notes, references, and data sources appear on a supplementary page to accompany Map 602. These notes describe the distribution of...

Tags

Alberta Diamond Inclusion Dataset

Description

This Alberta diamond inclusion dataset includes electron microprobe analyses of garnet, clinopyroxene, olivine, ferropericlase and rutile inclusions from diamonds sampled by the Buffalo Head Hills... More ≫

Description

This Alberta diamond inclusion dataset includes electron microprobe analyses of garnet, clinopyroxene, olivine, ferropericlase and rutile inclusions from diamonds sampled by the Buffalo Head Hills kimberlite field. The data are compiled from Davies et al. (2004) and Banas (2006). Diamond inclusions are of particular research interest in diamond exploration and mantle petrology because they provide direct information about the chemical composition of upper and lower mantle and about the petrogenetic sources of diamonds in a given area/deposit.

Tags

Alberta Kimberlite Xenocryst Dataset

Description

This kimberlite xenocryst dataset includes the electronic microprobe data from silicate and oxide xenocryst minerals from various ultrabasic to kimberlite rock occurrences in the northern Alberta... More ≫

Description

This kimberlite xenocryst dataset includes the electronic microprobe data from silicate and oxide xenocryst minerals from various ultrabasic to kimberlite rock occurrences in the northern Alberta kimberlite province. These data, which total 4,285 analyses, include 897 garnet 533 clinopyroxene 791 olivine 275 phlogopite 870 spinel/chromite 919 ilmenite

Tags

Isopach of the Sunchild Aquifer, Alberta (Gridded data, ASCII format)

Description

Sand bodies within the Sunchild aquifer subcrop over most of its extent, and because overlying Neogene sediment is relatively thin in the western part of the Paskapoo Formation, the unit expresses... More ≫

Description

Sand bodies within the Sunchild aquifer subcrop over most of its extent, and because overlying Neogene sediment is relatively thin in the western part of the Paskapoo Formation, the unit expresses itself as the present-day topography. Constructing the Sunchild aquifer-thickness map was somewhat problematic because of the difficulty of mapping the step-like distribution and connection of sand bodies that, in places, are laterally adjacent to muddy intervals. The resultant isopach was generated by subtracting the Lacombe Member surface from the Sunchild surface to yield an approximation of Sunchild aquifer thickness. The Sunchild aquifer thickens from less than 50 m in the east to more than 300 m to the west. The apparent great thickness (about 600 to 700 m) of aquifer along the deformation edge southwest of Drayton Valley is interpreted as an area of stacked, coarse fluvial deposits extending from the base of the Paskapoo Formation almost to surface.

Tags

Isopach of the Paskapoo Formation, Alberta (Gridded data, ASCII format)

Description

This is a raster dataset of the thickness of the Paskapoo Formation. It is a derived dataset created by the subtraction of the base of the Paskapoo Formation from the top of the formation, which... More ≫

Description

This is a raster dataset of the thickness of the Paskapoo Formation. It is a derived dataset created by the subtraction of the base of the Paskapoo Formation from the top of the formation, which in the western part of Alberta is also the bedrock topography. The gridded isopach data cover only the undeformed part of the Paskapoo Formation that extends west to the front ranges of the Rocky Mountains. The isopach data do not include those parts of the formation affected by tectonic folding or thrusting. The dataset is in ESRI ASCII grid format.

Tags

Isopach of the Haynes Aquifer, Alberta (Gridded data, ASCII format)

Description

This dataset is a grid of the thickness of the Haynes aquifer within the Paskapoo Formation. The Haynes aquifer is a regionally extensive body of sand that lies in the bottom part of the Paskapoo... More ≫

Description

This dataset is a grid of the thickness of the Haynes aquifer within the Paskapoo Formation. The Haynes aquifer is a regionally extensive body of sand that lies in the bottom part of the Paskapoo Formation. The isopach was created from the modelled results of the average sandiness of 25 m thick slices in boreholes completed within the Paskapoo Formation. Parts of the aquifer are as much as 100 m thick, particularly in the west near the deformation belt and in a region west of the city of Red Deer. The bulk of the unit averages about 50 m in thickness. Given the great range in elevation of the top of the unit, but the relatively uniform thickness of the bulk of the aquifer, we inferred that most of the Haynes aquifer was deposited prior to major deformation with only the western-most parts showing evidence of infill of enhanced accommodation space. Most of the Haynes aquifer is overlain by thick muddy sediments of the Lacombe Member and only outcrops along its eastern edge.

Tags

Twentieth Percentile Modelled Base of the Paskapoo Formation, Alberta (Gridded data, ASCII format)

Description

The base of the Paskapoo Formation is unconformable with the underlying Scollard Formation. Alberta Geological Survey differentiates the Paskapoo Formation from the underlying Scollard Formation... More ≫

Description

The base of the Paskapoo Formation is unconformable with the underlying Scollard Formation. Alberta Geological Survey differentiates the Paskapoo Formation from the underlying Scollard Formation by the first thick sandstone above the uppermost coal seam of the Ardley coal zone. We defined 'thick sandstone' to be 5 m or more thick. This dataset contains the gridded results of the structural surface of the base of the Paskapoo Formation modelled from stratigraphic picks of the >5 m sand above the Scollard Formation coal from oil and gas industry gamma-ray logs. We modelled only the undeformed part of the Paskapoo Formation, which lies east of the Rocky Mountains deformation belt. Because of uncertainty in defining the Paskapoo-Scollard contact, we selected the P20 (20th percentile or low estimate) modelled surface of those data, which is about 5 m deeper than the P50 or median estimated surface. Subsequent boundaries of slices were constructed parallel to this surface, recognizing...

Tags

Isopach of the Lacombe Aquitard, Alberta (Gridded data, ASCII format)

Description

This dataset maps the thickness of the Lacombe aquitard as defined by outputs of a 3-D model of sandiness in the Paskapoo Formation. The Lacombe aquitard consists of >65% non-sandy material in... More ≫

Description

This dataset maps the thickness of the Lacombe aquitard as defined by outputs of a 3-D model of sandiness in the Paskapoo Formation. The Lacombe aquitard consists of >65% non-sandy material in stacked, 25 m thick slices above the base of the Paskapoo Formation.

Tags

Structure Top of the Haynes Aquifer, Alberta (Gridded data, ASCII format)

Description

This is a 1000 m cell-sized raster grid dataset of the top of the sandstone of the Haynes member of the Paskapoo Formation. We mapped the sandstone using 3-D geostatistical modelling algorithms... More ≫

Description

This is a 1000 m cell-sized raster grid dataset of the top of the sandstone of the Haynes member of the Paskapoo Formation. We mapped the sandstone using 3-D geostatistical modelling algorithms from data derived from sand calculations of 25 m thick slice intervals of the Paskapoo Formation. We selected the >55% sand isovalue to define sandstone, based on the results of mini-models that show vertical hydraulic connections being established if sand abundance is 55% or greater. This grid represents the upper surface of that three-dimensional body defined by the >55% sand threshold value. Alberta Geological Survey Bulletin 66 provides a detailed description of how the unit was defined. The dataset is in ESRI ASCII grid format.

Tags

Structure Top of the Lacombe Aquitard, Alberta (Gridded data, ASCII format)

Description

This is a 1000 m cell-sized raster dataset of the upper surface of the Lacombe Member aquitard, modelled from the >65% silt and clay point data derived by depth-slice analysis of well-log data.... More ≫

Description

This is a 1000 m cell-sized raster dataset of the upper surface of the Lacombe Member aquitard, modelled from the >65% silt and clay point data derived by depth-slice analysis of well-log data. Alberta Geological Survey Bulletin 66 provides details on this grid dataset. The dataset is in ESRI ASCII grid format.

Tags