All Resources

Pick Elevations for the Bedrock Topography of the Alberta Plains (tabular data, tab delimited format)

Description

The bedrock topography of Alberta is the surface of the top of Upper Cretaceous and Paleogene bedrock, and reveals geomorphic features created by Paleogene to Recent river systems and Quaternary... More ≫

Description

The bedrock topography of Alberta is the surface of the top of Upper Cretaceous and Paleogene bedrock, and reveals geomorphic features created by Paleogene to Recent river systems and Quaternary glaciation. This dataset consists of previously published information from Alberta Geological Survey (AGS) maps and reports, as well as new data for which the quality has been assessed in order to apply a quality-weighting approach prior to modelling the bedrock topography surface. It is the data used to produce AGS Map 602, Bedrock Topography of Alberta. Explanatory notes, references, and data sources appear on a supplementary page to accompany Map 602. These notes describe the distribution of physiographic terrain elements of the bedrock surface across Alberta, and the sources and quality of the data that were used to interpolate this surface.

Tags

Bedrock Topography of Alberta (gridded data, ASCII format)

Description

The bedrock topography of Alberta is the surface of the top of Upper Cretaceous and Paleogene bedrock, and reveals geomorphic features created by Paleogene to Recent river systems and Quaternary... More ≫

Description

The bedrock topography of Alberta is the surface of the top of Upper Cretaceous and Paleogene bedrock, and reveals geomorphic features created by Paleogene to Recent river systems and Quaternary glaciation. This grid is a computer-generated geostatistical model of the bedrock topography of Alberta using previously published information from Alberta Geological Survey (AGS) maps and reports, as well as new data. The quality of this data has been assessed and then a quality-weighting approach was applied to the dataset prior to interpolation. The surface was modelled using a 500m x 500m grid cell spacing, and as such should not be used for local scale studies. This grid represents the surface portrayed in AGS Map 602, Bedrock Topography of Alberta, and this grid will continue to be updated as part of the Alberta Geological Framework project. Explanatory notes, references, and data sources appear on a supplementary page to accompany Map 602. These notes describe the distribution of...

Tags

Compilation of In Situ Stress Data from Alberta and Northeastern British Columbia (tabular data, tab delimited)

Description

This digital dataset is the compilation of an analysis of the in situ stress regime in several regions of Alberta and northeastern British Columbia conducted by Dr. Sebastian Bell under a contract... More ≫

Description

This digital dataset is the compilation of an analysis of the in situ stress regime in several regions of Alberta and northeastern British Columbia conducted by Dr. Sebastian Bell under a contract with the Alberta Geological Survey from 1999 to 2004. The dataset includes both new and previously published estimates for vertical stress gradients, minimum horizontal stress gradients, and stress orientation. Understanding the state of stress in the subsurface has always been important in the development of energy resources. The recent development of unconventional oil sand and low permeability hydrocarbon deposits, waste fluid disposal, greenhouse gas sequestration, and potential geothermal energy extraction all require knowledge of the state of stress to operate safely and economically. A lack of understanding of the state of stress in a given project area has the potential to negatively affect the economics of such projects and may expose operators to increased liabilities. Regional-...

Tags

Drift Thickness of Alberta, 1:2,000,000 scale (GIS data, line features)

Description

This dataset is a GIS version of part of Map 227, which is a regional synthesis of various published and unpublished maps. The data represent drift isopachs for Alberta. The southern part of... More ≫

Description

This dataset is a GIS version of part of Map 227, which is a regional synthesis of various published and unpublished maps. The data represent drift isopachs for Alberta. The southern part of Alberta, from 49 to 56 degrees north, was primarily compiled from existing 1:250,000 bedrock topography maps. The interpretation of the remaining northern portion of the province was based mostly on limited borehole data and information from existing 1:250,000 hydrogeological maps. The exposed areas represent areas where drift is absent or thin and discontinuous. Contour intervals are irregular and depend on local data density.

Tags

Bedrock Topography of Alberta, 1:2,000,000 scale (GIS data, line features)

Description

This dataset is a GIS version of Map 226, which is a regional synthesis of published and unpublished maps. The data represent 100 m elevation contours of the bedrock subcrop for Alberta. The... More ≫

Description

This dataset is a GIS version of Map 226, which is a regional synthesis of published and unpublished maps. The data represent 100 m elevation contours of the bedrock subcrop for Alberta. The southern part of Alberta, from 49 to 56 degrees north, was primarily compiled from existing 1:250,000 bedrock topography maps. The interpretation of the remaining northern portion of Alberta was based mostly on limited borehole data and information from existing 1:250,000 hydrogeological maps.

Tags

Drift Thickness of Pelican River Area, Alberta (NTS 83P) (GIS data, line features)

Description

The drift thickness map of the Pelican River area (NTS 83P) shows the variation in thickness of unconsolidated sediment lying between the bedrock surface and the present-day land surface, and... More ≫

Description

The drift thickness map of the Pelican River area (NTS 83P) shows the variation in thickness of unconsolidated sediment lying between the bedrock surface and the present-day land surface, and complements the regional drift thickness map of Alberta (Pawlowicz and Fenton, 1995). The thickness of the drift varies from less than 20 metres in uplands, such as the Pelican Mountains, to a little over 260 metres in the Wiau Valley in the northeast part of the map area. The thickest drift fills the paleovalleys containing the major valleys: the Wiau Valley and the Leismer Valley in the northeast, and the north-trending Amesbury Valley in the central portion of the area.

Tags

Bedrock Topography of Pelican River Area, Alberta (NTS 83P) (GIS data, line features)

Description

The bedrock topography map of the Pelican River area (NTS 83P) shows the elevation of the bedrock surface. In general, the surface topography reflects the bedrock topography: bedrock highs... More ≫

Description

The bedrock topography map of the Pelican River area (NTS 83P) shows the elevation of the bedrock surface. In general, the surface topography reflects the bedrock topography: bedrock highs underlie the Pelican, Amadou and May Hills highlands, and the buried valleys lie within the Wabasca and Wandering River plains. The elevation of the bedrock surface ranges from 360 metres above sea level (masl) in the Wabasca Plain to slightly more than 920 masl in the Pelican Mountains. Segments of three major buried valleys are present: the Wiau Valley and the Leismer Valley in the northeast, and the south to northwest-trending Amesbury Valley in the central portion of the area.

Tags

Bedrock Thalwegs of Pelican River Area, Alberta (NTS 83P) (GIS data, thalweg line features)

Description

The data represent the locations of thalwegs (paleo-channels) incised in the bedrock surface. Segments of three major buried valleys are present: the Wiau Valley and the Leismer Valley in the... More ≫

Description

The data represent the locations of thalwegs (paleo-channels) incised in the bedrock surface. Segments of three major buried valleys are present: the Wiau Valley and the Leismer Valley in the northeast, and the south to northwest-trending Amesbury Valley in the central portion of the area.

Tags

Tectonic domains for the basement of the WCSB (GIS data, polygon features)

Description

The Geological Atlas of the Western Canada Sedimentary Basin was designed primarily as a reference volume documenting the subsurface geology of the Western Canada Sedimentary Basin. This GIS... More ≫

Description

The Geological Atlas of the Western Canada Sedimentary Basin was designed primarily as a reference volume documenting the subsurface geology of the Western Canada Sedimentary Basin. This GIS dataset is one of a collection of shapefiles representing part of Chapter 4 of the Atlas, Potential Fields and Basement Structure - Western Canada Sedimentary Basin, Figure 1, Tectonic domains for the basement of the WCSB. Shapefiles were produced from archived digital files created by the Alberta Geological Survey in the mid-1990s, and edited in 2005-06 to correct, attribute and consolidate the data into single files by feature type and by figure.

Tags

Tectonic domains for the basement of the WCSB (GIS data, line features)

Description

The Geological Atlas of the Western Canada Sedimentary Basin was designed primarily as a reference volume documenting the subsurface geology of the Western Canada Sedimentary Basin. This GIS... More ≫

Description

The Geological Atlas of the Western Canada Sedimentary Basin was designed primarily as a reference volume documenting the subsurface geology of the Western Canada Sedimentary Basin. This GIS dataset is one of a collection of shapefiles representing part of Chapter 4 of the Atlas, Potential Fields and Basement Structure - Western Canada Sedimentary Basin, Figure 1, Tectonic domains for the basement of the WCSB. Shapefiles were produced from archived digital files created by the Alberta Geological Survey in the mid-1990s, and edited in 2005-06 to correct, attribute and consolidate the data into single files by feature type and by figure.

Tags