All Resources

Industrial Heartland - Designated Industrial Zone Boundaries

Description

The dataset was developed to provide geographic guide to better understand the boundaries of the Industrial Heartland - Designated Industrial Zone (IH-DIZ). The IH-DIZ industrial zoned land... More ≫

Description

The dataset was developed to provide geographic guide to better understand the boundaries of the Industrial Heartland - Designated Industrial Zone (IH-DIZ). The IH-DIZ industrial zoned land extends into 5 different municipalities, including: Approx. 533 km2 within the City of Fort Saskatchewan and the Counties of Lamont, Strathcona and Sturgeon. Approx. 49 km2 in the City of Edmonton, which is the industrial area known as the Edmonton Energy and Technology Park.

Tags

Cold Lake Sub-Regional Plan Spatial Data

Description

Sub-regional plans support working landscapes that provide economic opportunities and maintain healthy landscapes by outlining management approaches and requirements for development and human... More ≫

Description

Sub-regional plans support working landscapes that provide economic opportunities and maintain healthy landscapes by outlining management approaches and requirements for development and human footprint restoration. These plans enable public lands to support the interests of all Albertans, including Indigenous peoples, for the present and into the future. The Cold Lake Sub-Regional Plan Spatial Data dataset contains spatial data that can be used for planning as described within the Cold Lake Sub-regional Plan (2022). The following datasets are available: Cold Lake Watercourse/Waterbody Setbacks, and Cold Lake Recreational Management Areas.

Tags

Alberta Vegetation Inventory (AVI) Crown

Description

The Alberta Vegetation Inventory (AVI) is a photo-based digital inventory developed to identify the type, extent and conditions of vegetation, where it exists and what changes are occurring. This... More ≫

Description

The Alberta Vegetation Inventory (AVI) is a photo-based digital inventory developed to identify the type, extent and conditions of vegetation, where it exists and what changes are occurring. This dataset consolidates all available AVI into a single feature class.This dataset is produced for the Government of Alberta and is available to the general public.

Tags

Alberta Vegetation Inventory (AVI) Crown Post-Inventory Harvest Areas

Description

The purpose of this dataset is to identify areas harvested after the date of the inventory. The Forest Stewardship and Trade Branch is responsible for the creation and maintenance of these... More ≫

Description

The purpose of this dataset is to identify areas harvested after the date of the inventory. The Forest Stewardship and Trade Branch is responsible for the creation and maintenance of these boundaries for Crown-managed Forest Management Units. This dataset is produced for the Government of Alberta and is available to the general public.

Tags

Derived Ecosite Phase v2.0

Description

Derived Ecosite Phase (DEP) v2.0 is a digital and spatial representation of ecological sites and phases in those areas of Alberta where both Alberta Vegetation Inventory (AVI) and lidar are... More ≫

Description

Derived Ecosite Phase (DEP) v2.0 is a digital and spatial representation of ecological sites and phases in those areas of Alberta where both Alberta Vegetation Inventory (AVI) and lidar are available. The AVI is an imagery-based digital inventory developed to identify the type, extent and conditions of vegetation, where it exists and what changes are occurring. The most up-to-date ecological site phases can be found in the Ecological Site Guides. Guides are broken into individual Natural Subregions. See the Cross Reference Section for additional information. This dataset is produced for the Government of Alberta and is available to the general public. Please consult the Distribution Information of this metadata for the appropriate contact to acquire this dataset.This dataset covers the areas of Alberta where there is both AVI and lidar coverage (mainly in the Green Area). AVIE and lidar-derived slope position were created by the Forest Stewardship and Trade Branch, Forestry...

Tags

Frost Free Period 1971-2000

Description

The data represents the frost-free period in Alberta over the 30-year period from 1971 to 2000. A 30-year period is used to describe the present climate since it is enough time to filter out... More ≫

Description

The data represents the frost-free period in Alberta over the 30-year period from 1971 to 2000. A 30-year period is used to describe the present climate since it is enough time to filter out short-term fluctuations but is not dominated by any long-term trend in the climate. The frost-free period is the number of days between the last date of 00C in the spring and the first date of 00C in the fall. Frost free periods in Alberta vary from 125 days in the south to less than 85 days in higher elevation, non-agricultural areas.The frost-free period is presented as days above 0&deg.C in the following classes: less than 85, 85 to 95, 95 to 105, 105 to 115, 115 to 125 and greater than 125. This resource was created using ArcGIS.

Tags

Fertilizer Expense Index 2001

Description

The data represents the relative expense of fertilizer and lime in the agricultural area of Alberta. It is an estimate of the degree to which agriculture may affect nutrient levels in surface and... More ≫

Description

The data represents the relative expense of fertilizer and lime in the agricultural area of Alberta. It is an estimate of the degree to which agriculture may affect nutrient levels in surface and groundwater. The classes shown on the map are ranked between 0 (lowest) and 1 (highest).Mapping the relative values of fertilizer expenses by SLC polygon area is useful as an indication of where more fertilizer is applied in the province and as a proxy indicator for crop production.It also suggests the relative agricultural intensity in various parts of the province. This resource was created in 2002 using ArcGIS.

Tags

Wind Erosion Risk

Description

This map displays the risk of soil degradation by wind in the agricultural region of Alberta. Wind erosion is a concern because it reduces soil quality by removing soil nutrients, smaller soil... More ≫

Description

This map displays the risk of soil degradation by wind in the agricultural region of Alberta. Wind erosion is a concern because it reduces soil quality by removing soil nutrients, smaller soil particles and organic matter. Wind erosion can reduce air quality during extreme erosion events and also reduce water quality if eroded particles drift into streams and lakes. The map uses five classes to describe the wind erosion risk on bare, unprotected mineral soil: negligible, low, moderate, high and severe. This resource was created using ArcGIS. It was originally published as a print map in 1989.

Tags

Ground Water Quality Risk

Description

This map displays an assessment of groundwater quality risk for the agricultural area of Alberta. Agricultural activities that may have an impact on groundwater quality include livestock, crop... More ≫

Description

This map displays an assessment of groundwater quality risk for the agricultural area of Alberta. Agricultural activities that may have an impact on groundwater quality include livestock, crop production and agrochemical use. These activities along with the physical characteristics represented by aquifer vulnerability and available moisture were combined to produce this map. The classes shown on the map were ranked from 0 (lowest risk) to 1 (highest risk). This resource was created in 2005 using ArcGIS.

Tags

Soil Erosion Risk

Description

This map displays an assessment of soil erosion risk for the agricultural area of Alberta. Loss of protective residue cover through cultivation will increase the potential risk of soil erosion.... More ≫

Description

This map displays an assessment of soil erosion risk for the agricultural area of Alberta. Loss of protective residue cover through cultivation will increase the potential risk of soil erosion. The vulnerability of the soil to erosion combined with the intensity of cultivation determines the degree to which the soil may be at risk. The classes shown on the map were ranked from 0 (lowest risk) to 1 (highest risk). This resource was created in 2002 using ArcGIS.

Tags