All Resources

Alberta Flood Mapping

Description

Flood maps are created by combining hydraulic model results with high-accuracy ground information. Field surveys and LiDAR remote sensing are used to collect river and floodplain elevations,... More ≫

Description

Flood maps are created by combining hydraulic model results with high-accuracy ground information. Field surveys and LiDAR remote sensing are used to collect river and floodplain elevations, channel cross section data, bridge and culvert information, and flood berm details. A hydrology assessment using recorded and historic flow measurements is typically used to estimate river flows for a wide range of possible open water floods with different chances of occurring each year. When appropriate, an ice jam frequency analysis is undertaken. All this information is used to build a hydraulic model of a river system, which is calibrated using highwater marks and aerial imagery from past floods to ensure that results for the different flood flows being mapped are reasonable. Flood inundation maps show areas at risk for different sized floods, including ice jam floods in some communities. These maps also identify areas that could be flooded if berms or other flood control structures fail and...

Tags

Isopach of the Sunchild Aquifer, Alberta (Gridded data, ASCII format)

Description

Sand bodies within the Sunchild aquifer subcrop over most of its extent, and because overlying Neogene sediment is relatively thin in the western part of the Paskapoo Formation, the unit expresses... More ≫

Description

Sand bodies within the Sunchild aquifer subcrop over most of its extent, and because overlying Neogene sediment is relatively thin in the western part of the Paskapoo Formation, the unit expresses itself as the present-day topography. Constructing the Sunchild aquifer-thickness map was somewhat problematic because of the difficulty of mapping the step-like distribution and connection of sand bodies that, in places, are laterally adjacent to muddy intervals. The resultant isopach was generated by subtracting the Lacombe Member surface from the Sunchild surface to yield an approximation of Sunchild aquifer thickness. The Sunchild aquifer thickens from less than 50 m in the east to more than 300 m to the west. The apparent great thickness (about 600 to 700 m) of aquifer along the deformation edge southwest of Drayton Valley is interpreted as an area of stacked, coarse fluvial deposits extending from the base of the Paskapoo Formation almost to surface.

Tags

Isopach of the Lacombe Aquitard, Alberta (Gridded data, ASCII format)

Description

This dataset maps the thickness of the Lacombe aquitard as defined by outputs of a 3-D model of sandiness in the Paskapoo Formation. The Lacombe aquitard consists of >65% non-sandy material in... More ≫

Description

This dataset maps the thickness of the Lacombe aquitard as defined by outputs of a 3-D model of sandiness in the Paskapoo Formation. The Lacombe aquitard consists of >65% non-sandy material in stacked, 25 m thick slices above the base of the Paskapoo Formation.

Tags

Isopach of the Haynes Aquifer, Alberta (Gridded data, ASCII format)

Description

This dataset is a grid of the thickness of the Haynes aquifer within the Paskapoo Formation. The Haynes aquifer is a regionally extensive body of sand that lies in the bottom part of the Paskapoo... More ≫

Description

This dataset is a grid of the thickness of the Haynes aquifer within the Paskapoo Formation. The Haynes aquifer is a regionally extensive body of sand that lies in the bottom part of the Paskapoo Formation. The isopach was created from the modelled results of the average sandiness of 25 m thick slices in boreholes completed within the Paskapoo Formation. Parts of the aquifer are as much as 100 m thick, particularly in the west near the deformation belt and in a region west of the city of Red Deer. The bulk of the unit averages about 50 m in thickness. Given the great range in elevation of the top of the unit, but the relatively uniform thickness of the bulk of the aquifer, we inferred that most of the Haynes aquifer was deposited prior to major deformation with only the western-most parts showing evidence of infill of enhanced accommodation space. Most of the Haynes aquifer is overlain by thick muddy sediments of the Lacombe Member and only outcrops along its eastern edge.

Tags

Structure Top of the Lacombe Aquitard, Alberta (Gridded data, ASCII format)

Description

This is a 1000 m cell-sized raster dataset of the upper surface of the Lacombe Member aquitard, modelled from the >65% silt and clay point data derived by depth-slice analysis of well-log data.... More ≫

Description

This is a 1000 m cell-sized raster dataset of the upper surface of the Lacombe Member aquitard, modelled from the >65% silt and clay point data derived by depth-slice analysis of well-log data. Alberta Geological Survey Bulletin 66 provides details on this grid dataset. The dataset is in ESRI ASCII grid format.

Tags

Distribution of the Lacombe Aquitard (GIS data, polygon features)

Description

This GIS dataset illustrates the areal extent (surface and subsurface) of the Lacombe aquitard. It is in ESRI shapefile format.

Tags