Open Government Program

All Resources

Search a listing of Government of Alberta open datasets and publications. Can’t find what you are looking for? Suggest a resource.

19 results

Organizations: Transportation Tags: highway geometric design guide

Views: 73
Updated

July 11, 2019

Description

This Bulletin is being issued as a revision and/or update to the Alberta Transportation, Highway Geometric Design Guide.


Views: 592
Updated

July 1, 2019

Description

The purpose of this guide is to promote uniformity for highway design in Alberta and to encourage the provision of safe and efficient roads for the well-being of the travelling public and society in general. The guide establishes uniform geometric design standards and procedures to carry out the...


Views: 49
Updated

January 25, 2019

Description

This Design Bulletin is to provide guidelines for the utilization of Median Acceleration Lanes (MAL) on divided highways under Alberta Transportation’s jurisdiction.


Views: 81
Updated

April 6, 2018

Description

The purpose of this document is to supply supplemental guidelines to the Alberta Highway Geometric Design Guide 1999 edition for the urban portions of the provincial highway network. This document is being issued as a draft to allow it’s use for a trial period so that there will be an opportunity...


Views: 178
Updated

April 1, 2018

Description

The department has completed a study of its highway service classification system. The primary methodology used in the study was to identify the functional purpose of highways in the province.


Views: 37
Updated

September 1, 2017

Description

The intent of Design Standards/Practice Exceptions is to determine, justify and document that good engineering judgment is being exercised.


Views: 56
Updated

June 28, 2016

Description

This Bulletin supersedes Bulletin 31 concerning the policy and guidelines for the use of roundabouts on roadways under Alberta Transportation’s direction and control.


Views: 31
Updated

November 10, 2014

Description

The Department has accepted the attached document, Considerations for Selection of Freeway Over/Under Configuration at Service Interchanges. The purpose of the document is to provide increased guidance to Engineers and Planners and promote a more consistent design philosophy on Alberta...


Views: 36
Updated

June 1, 2010

Description

This bulletin is issued to inform practitioners of the department's revised guidelines on the centerline to centerline spacing for new rural divided highway cross section. Where land is considered to be of lower value (not suitable for cultivation or grazing) the use of a wider median (55m or...


Views: 35
Updated

March 30, 2010

Description

This Bulletin is issued to provide guidance to planners and designers regarding the spacing, placement, signing and geometric details of median crossovers on rural divided highways in Alberta. There is a need to consider roadside safety, highway operations, access management, access by emergency...