Open Government Program

All Resources

Search a listing of Government of Alberta open datasets and publications. Can’t find what you are looking for? Suggest a resource.

23 results

Organizations: Transportation Tags: highway geometric design

Views: 592
Updated

July 1, 2019

Description

The purpose of this guide is to promote uniformity for highway design in Alberta and to encourage the provision of safe and efficient roads for the well-being of the travelling public and society in general. The guide establishes uniform geometric design standards and procedures to carry out the...


Views: 52
Updated

December 15, 2018

Description

This bulletin is being issued as a revision and/or update to Alberta Transportation's roadside design guide, November 2007.


Views: 81
Updated

April 6, 2018

Description

The purpose of this document is to supply supplemental guidelines to the Alberta Highway Geometric Design Guide 1999 edition for the urban portions of the provincial highway network. This document is being issued as a draft to allow it’s use for a trial period so that there will be an opportunity...


Views: 178
Updated

April 1, 2018

Description

The department has completed a study of its highway service classification system. The primary methodology used in the study was to identify the functional purpose of highways in the province.


Views: 69
Updated

March 19, 2018

Description

This Bulletin has been developed in order to achieve consistent practices for installation of rumble strips. This opportunity has also been used to fine-tune the placement criteria to improve the safety results and general cost-effectiveness of the program.


Views: 37
Updated

September 1, 2017

Description

The intent of Design Standards/Practice Exceptions is to determine, justify and document that good engineering judgment is being exercised.


Views: 140
Updated

October 1, 2016

Description

This Bulletin is issued to inform practitioners of the department’s guidelines on the use of High Tension Cable Barrier (HTCB) installed in the median and on the roadside (or right hand side in the direction of travel) of the roadway. Cable barrier has been proven to effectively prevent or reduce...


Views: 57
Updated

June 28, 2016

Description

This Bulletin supersedes Bulletin 31 concerning the policy and guidelines for the use of roundabouts on roadways under Alberta Transportation’s direction and control.


Views: 101
Updated

January 22, 2013

Description

This bulletin provides MicroStation CAD Standards and InRoads workspace settings for Alberta Transportation Highway and Bridge projects.


Views: 34
Updated

November 20, 2012

Description

This Bulletin is being issued as a revision and/or update to the Alberta Transportation’s Roadside Design Guide, November 2007 (AT RDG).