All Resources

Wabamun Lake Modelling Case Study - Chemical Analyses of Formation Waters (point features, comma separated text file) (NTS 83G)

Description

In November 2005, participants at the Workshop on Geological Storage of CO2 at Princeton University agreed on the need for a common test problem to assess various models to simulate the fate of... More ≫

Description

In November 2005, participants at the Workshop on Geological Storage of CO2 at Princeton University agreed on the need for a common test problem to assess various models to simulate the fate of CO2 injected into the subsurface. Alberta Geological Survey offered to make available the data for the Wabamun Lake area in Alberta, Canada, which were assembled to develop a comprehensive model for studying CO2 geological storage. The Wabamun Lake area, southwest of Edmonton in central Alberta, was selected as the test area because a variety of favourable conditions identified it as a potential site for future, large-scale CO2 injection. Several large, industrial CO2 point sources are in the area, resulting in short transportation distances of the captured gas. Various deep saline formations with sufficient capacity to accept and store large volumes of CO2 in supercritical phase exist at the appropriate depth and are overlain by thick confining shale units. Most importantly, a wealth of data...

Tags

Bedrock Topography of Alberta (gridded data, ASCII format)

Description

The bedrock topography of Alberta is the surface of the top of Upper Cretaceous and Paleogene bedrock, and reveals geomorphic features created by Paleogene to Recent river systems and Quaternary... More ≫

Description

The bedrock topography of Alberta is the surface of the top of Upper Cretaceous and Paleogene bedrock, and reveals geomorphic features created by Paleogene to Recent river systems and Quaternary glaciation. This grid is a computer-generated geostatistical model of the bedrock topography of Alberta using previously published information from Alberta Geological Survey (AGS) maps and reports, as well as new data. The quality of this data has been assessed and then a quality-weighting approach was applied to the dataset prior to interpolation. The surface was modelled using a 500m x 500m grid cell spacing, and as such should not be used for local scale studies. This grid represents the surface portrayed in AGS Map 602, Bedrock Topography of Alberta, and this grid will continue to be updated as part of the Alberta Geological Framework project. Explanatory notes, references, and data sources appear on a supplementary page to accompany Map 602. These notes describe the distribution of...

Tags

Sylvan Lake Sub-Basin Hydrostratigraphic Model - Top of the Paskapoo Formation - Middle Composite Slice, Central Alberta (Gridded data, ASCII format)

Description

This grid dataset is part of the three-dimensional (3-D) hydrostratigraphic model of the Sylvan Lake sub-basin in the Edmonton-Calgary Corridor, central Alberta. It represents the structure top of... More ≫

Description

This grid dataset is part of the three-dimensional (3-D) hydrostratigraphic model of the Sylvan Lake sub-basin in the Edmonton-Calgary Corridor, central Alberta. It represents the structure top of the Paskapoo Formation - Middle Composite Slice of the Sylvan Lake sub-basin. The Paskapoo Formation is a highly heterogeneous system. To satisfy the needs of a groundwater flow model, internal characterization of rock properties was necessary to partition the formation into three distinct geological domains. The Middle Composite Slice is the middle of these three domains. Alberta Geological Survey (AGS) Open File Report 2014-10 includes a full description of the process used to produce this structure grid.

Tags

Sylvan Lake Sub-Basin Hydrostratigraphic Model - Top of the Paskapoo Formation - Lower Composite Slice, Central Alberta (Gridded data, ASCII format)

Description

This grid dataset is part of the three-dimensional (3-D) hydrostratigraphic model of the Sylvan Lake sub-basin in the Edmonton-Calgary Corridor, central Alberta. It represents the structure top of... More ≫

Description

This grid dataset is part of the three-dimensional (3-D) hydrostratigraphic model of the Sylvan Lake sub-basin in the Edmonton-Calgary Corridor, central Alberta. It represents the structure top of the Paskapoo Formation - Lower Composite Slice of the Sylvan Lake sub-basin. The Paskapoo Formation is a highly heterogeneous system. To satisfy the needs of a groundwater flow model, internal characterization of rock properties was necessary to partition the formation into three distinct geological domains. The Lower Composite Slice is the lowest of these three domains. Alberta Geological Survey (AGS) Open File Report 2014-10 includes a full description of the process used to produce this structure grid.

Tags

Sylvan Lake Sub-Basin Hydrostratigraphic Model - Top of Hydrostratigraphic Unit S1 Within the Neogene-Quaternary Succession, Central Alberta (Gridded data, ASCII format)

Description

This dataset is part of the three-dimensional (3-D) hydrostratigraphic model of the Sylvan Lake sub-basin in the Edmonton-Calgary Corridor, central Alberta. It represents the structure top of... More ≫

Description

This dataset is part of the three-dimensional (3-D) hydrostratigraphic model of the Sylvan Lake sub-basin in the Edmonton-Calgary Corridor, central Alberta. It represents the structure top of hydrostratigraphic unit (HSU) S1, which contains coarse-grained material lying directly on bedrock and constrained to paleovalleys in the Neogene-Quaternary succession of the Sylvan Lake sub-basin. This dataset supplements Alberta Geological Survey (AGS) Open File Report 2014-10, which includes a full description of steps taken to produce the structure grid.

Tags

Sylvan Lake Sub-Basin Hydrostratigraphic Model - Top of Hydrostratigraphic Unit C1 Within the Neogene-Quaternary Succession, Central Alberta (Gridded data, ASCII format)

Description

This dataset is part of the three-dimensional (3-D) hydrostratigraphic model of the Sylvan Lake sub-basin in the Edmonton-Calgary Corridor, central Alberta. It represents the structure top of... More ≫

Description

This dataset is part of the three-dimensional (3-D) hydrostratigraphic model of the Sylvan Lake sub-basin in the Edmonton-Calgary Corridor, central Alberta. It represents the structure top of hydrostratigraphic unit (HSU) C1, which contains fine-grained materials underlying coarse-grained sediments of HSU S2 in the Neogene-Quaternary succession of the Sylvan Lake sub-basin. This dataset supplements Alberta Geological Survey (AGS) Open File Report 2014-10, which includes a full description of steps taken to produce the structure grid.

Tags

Quaternary geology and bedrock subcrop of the Cold Lake to Ft. McMurray area, Alberta - Surface digital elevation model (250m resolution) - (1:250,000 scale gridded data)

Description

A digital elevation model derived from the Federal DEM (76m resolution) and resampled to a 250 m cell-size resolution.

Tags

Quaternary geology and bedrock subcrop of the Cold Lake to Ft. McMurray area, Alberta - Surface structure, Empress Fm. Unit 3 sand and gravel - (1:250,000 scale gridded data)

Description

A digital grid of the top of the Empress Fm. Unit 3 sand and gravel, (the uppermost unit in the Empress Formation), where present, or the topography of the surrounding landscape, where Unit 3 is... More ≫

Description

A digital grid of the top of the Empress Fm. Unit 3 sand and gravel, (the uppermost unit in the Empress Formation), where present, or the topography of the surrounding landscape, where Unit 3 is absent. The unit is originally modeled from borehole data and adjusted to the bedrock surface, the surfaces of units 1 and 2 of the Empress Formation, the and present-day land surface. The grid is generated at a 250 m cell-size resolution, based on information as recent as 2003.

Tags

Quaternary geology and bedrock subcrop of the Cold Lake to Ft. McMurray area, Alberta - Surface structure, Empress Fm. Unit 1 sand and gravel - (1:250,000 scale gridded data)

Description

A digital grid of the top of the Empress Fm. Unit 1 sand and gravel, (the lowermost unit in the Empress Formation), where present, or the topography of the surrounding landscape, where Unit 1 is... More ≫

Description

A digital grid of the top of the Empress Fm. Unit 1 sand and gravel, (the lowermost unit in the Empress Formation), where present, or the topography of the surrounding landscape, where Unit 1 is absent. The unit is originally modeled from borehole data and adjusted to the bedrock surface and present-day land surface. The grid is generated at a 250 m cell-size resolution, based on information as recent as 2003.

Tags

Quaternary geology and bedrock subcrop of the Cold Lake to Ft. McMurray area, Alberta - Surface structure, Empress Fm. Unit 2 silt and clay - (1:250,000 scale gridded data)

Description

A digital grid of the top of the Empress Fm. Unit 2 silt and clay, (the middle unit in the Empress Formation), where present, or the topography of the surrounding landscape, where Unit 2 is... More ≫

Description

A digital grid of the top of the Empress Fm. Unit 2 silt and clay, (the middle unit in the Empress Formation), where present, or the topography of the surrounding landscape, where Unit 2 is absent. The unit is originally modeled from borehole data and adjusted to the bedrock surface, the surface of Unit 1, and the present-day land surface. The grid is generated at a 250 m cell-size resolution, based on information as recent as 2003.

Tags