All Resources

Quantification protocol for biofuel production and usage. Version 1

Description

Written for the biofuel production facility or project developer, this protocol quantifies the emission reductions from the avoidance of fossil fuel consumption when the fossil fuel is replaced by... More ≫

Description

Written for the biofuel production facility or project developer, this protocol quantifies the emission reductions from the avoidance of fossil fuel consumption when the fossil fuel is replaced by biofuels on an equivalent energy potential basis. The protocol also includes reductions in greenhouse gas (GHG) emissions due to any heat/power production and electricity generation related to the process, and from the avoidance of landfilling any materials which may be diverted for conversion to biofuel. The protocol is not intended to be prescriptive, but instead serve as a generic “recipe” for biofuel facility owners and operators to follow in order to meet measurement, monitoring and GHG quantification requirements.

Tags

Quantification protocol for fuel switching in mobile equipment. Version 1.0

Description

This quantification protocol describes the process for quantifying greenhouse gas emission reductions resulting from converting mobile fleets to lower-greenhouse gas intensity fuels while... More ≫

Description

This quantification protocol describes the process for quantifying greenhouse gas emission reductions resulting from converting mobile fleets to lower-greenhouse gas intensity fuels while maintaining an equal or greater level of service.

Tags

Technical guidance for offset project developers. Version 4.0

Description

The purpose of this doucment is to assist offset market participants (protocol developers) wishing to develop quantification protocols for use in the Alberta offset system where the intended final... More ≫

Description

The purpose of this doucment is to assist offset market participants (protocol developers) wishing to develop quantification protocols for use in the Alberta offset system where the intended final purchaser of offset credits generated is a facility regulated under the Specified Gas Emitters Regulation. Alberta's offset market was initiated as a market instrument to support compliance under the Specified Gas Emitters Regulation. The Regulation requires all large, industrial facilities in Alberta emitting over 100,000 tonnes of carbon dioxide equivalent per year to reduce their emissions intensity by 12 per cent per year from their government approved baseline emission intensity.

Tags

Quantification protocol for the conversion of drilling rigs from diesel-electric to high-line electricity sources. Version 1.0

Description

This protocol provides general requirements for measurement, monitoring, verification, and greenhouse gas quantification requirements for greenhouse gas emission reductions resulting from the... More ≫

Description

This protocol provides general requirements for measurement, monitoring, verification, and greenhouse gas quantification requirements for greenhouse gas emission reductions resulting from the conversion of diesel-generated electricity to high-line electricity powered drilling rigs.

Tags

Technical guidance for completing specified gas compliance reports. Version 4.0

Description

The purpose of this document is to assist facilities regulated under the Specified Gas Emitters Regulation in completing annual compliance reports. It also provides information on the compliance... More ≫

Description

The purpose of this document is to assist facilities regulated under the Specified Gas Emitters Regulation in completing annual compliance reports. It also provides information on the compliance options available for facilities that are not able to meet their emissions reduction target through facility level improvements.

Tags

Technical guidance for offset protocol developers. Version 1.0

Description

The purpose of this document is to assist offset market participants (protocol developers) wishing to develop quantification protocols for use in the Alberta offset system where the intended final... More ≫

Description

The purpose of this document is to assist offset market participants (protocol developers) wishing to develop quantification protocols for use in the Alberta offset system where the intended final purchaser of offset credits generated is a facility regulated under the Specified Gas Emitters Regulation. Alberta's offset market was initiated as a market instrument to support compliance under the Specified Gas Emitters Regulation. The Regulation requires all large, industrial facilities in Alberta emitting over 100,000 tonnes of carbon dioxide equivalent per year to reduce their emissions intensity by 12 per cent per year from their government approved baseline emission intensity.

Tags

Technical guidance for offset project developers. Version 2.0

Description

The purpose of this document is to assist offset market participants in implementing offset projects for use in the Alberta offset system where the intended final purchaser is a facility regulated... More ≫

Description

The purpose of this document is to assist offset market participants in implementing offset projects for use in the Alberta offset system where the intended final purchaser is a facility regulated under the Specified Gas Emitters Regulation.

Tags

Quantification protocol for energy efficiency in commercial and institutional buildings. Version 1.0

Description

This document establishes approved methodology for quantifying greenhouse gas emission reductions from energy efficiency measures implemented in commercial and institutional buildings. This... More ≫

Description

This document establishes approved methodology for quantifying greenhouse gas emission reductions from energy efficiency measures implemented in commercial and institutional buildings. This quantification protocol can be used by project developers to quantify greenhouse gas emission reductions resulting from the implementation of energy conservation measures resulting from changes in management practices and/or actual building improvements in new and retrofit projects. Emissions reductions are calculated as a difference in energy use in the project condition compared to the baseline. New builds are required to establish a baseline based on applicable building codes and a project condition that incorporates changes beyond these minimum standards. Retrofit projects are required to establish a baseline based on a greater of one full calendar year or one full operating cycle of data for actual building operations. Any changes in baseline conditions such as weather or building occupancy...

Tags

Quantification protocol for engine fuel management and vent gas capture projects. Version 1.0

Description

This protocol quantifies greenhouse gas (GHG) reductions that result from two related activities: the improvement in the fuel efficiency of natural gas combustion engines, and the capture of gases... More ≫

Description

This protocol quantifies greenhouse gas (GHG) reductions that result from two related activities: the improvement in the fuel efficiency of natural gas combustion engines, and the capture of gases (primarily methane) normally vented to the atmosphere. The quantification approaches for measuring GHG reductions for both components are based on measurement and monitoring and thus provide a high level of accuracy. The protocol is written for those familiar with the operation of natural gas combustion engines and control systems that manage the fuel consumption for these engines.

Tags

Quantification protocol for instrument gas to instrument air conversion in process control systems. Version 1.x

Description

This protocol serves as a generic ‘recipe’ for project proponents to follow in order to meet the measurement, monitoring, and greenhouse gas quantification requirements for reductions resulting... More ≫

Description

This protocol serves as a generic ‘recipe’ for project proponents to follow in order to meet the measurement, monitoring, and greenhouse gas quantification requirements for reductions resulting from conversion of instrument gas to instrument air in process control systems. A process flow diagram for a typical project using compressed air to provide pressure to instrument controllers. Upon conversion, all methane that would have been vented will be replaced by compressed air.

Tags