All Resources

Quantification protocol for biofuel production and usage. Version 1

Description

Written for the biofuel production facility or project developer, this protocol quantifies the emission reductions from the avoidance of fossil fuel consumption when the fossil fuel is replaced by... More ≫

Description

Written for the biofuel production facility or project developer, this protocol quantifies the emission reductions from the avoidance of fossil fuel consumption when the fossil fuel is replaced by biofuels on an equivalent energy potential basis. The protocol also includes reductions in greenhouse gas (GHG) emissions due to any heat/power production and electricity generation related to the process, and from the avoidance of landfilling any materials which may be diverted for conversion to biofuel. The protocol is not intended to be prescriptive, but instead serve as a generic “recipe” for biofuel facility owners and operators to follow in order to meet measurement, monitoring and GHG quantification requirements.

Tags

Quantification protocol for fuel switching in mobile equipment. Version 1.0

Description

This quantification protocol describes the process for quantifying greenhouse gas emission reductions resulting from converting mobile fleets to lower-greenhouse gas intensity fuels while... More ≫

Description

This quantification protocol describes the process for quantifying greenhouse gas emission reductions resulting from converting mobile fleets to lower-greenhouse gas intensity fuels while maintaining an equal or greater level of service.

Tags

Technical guidance for offset project developers. Version 4.0

Description

The purpose of this doucment is to assist offset market participants (protocol developers) wishing to develop quantification protocols for use in the Alberta offset system where the intended final... More ≫

Description

The purpose of this doucment is to assist offset market participants (protocol developers) wishing to develop quantification protocols for use in the Alberta offset system where the intended final purchaser of offset credits generated is a facility regulated under the Specified Gas Emitters Regulation. Alberta's offset market was initiated as a market instrument to support compliance under the Specified Gas Emitters Regulation. The Regulation requires all large, industrial facilities in Alberta emitting over 100,000 tonnes of carbon dioxide equivalent per year to reduce their emissions intensity by 12 per cent per year from their government approved baseline emission intensity.

Tags

Quantification protocol for selection for low residual feed intake in beef cattle. Version 1.0

Description

The scope of this protocol is limited to enteric fermentation emissions and associated manure greenhouse gas emissions from beef cattle using a functionally equivalent metric of emissions per... More ≫

Description

The scope of this protocol is limited to enteric fermentation emissions and associated manure greenhouse gas emissions from beef cattle using a functionally equivalent metric of emissions per kilogram of live cattle weight.

Tags

Quantification protocol for the conversion of drilling rigs from diesel-electric to high-line electricity sources. Version 1.0

Description

This protocol provides general requirements for measurement, monitoring, verification, and greenhouse gas quantification requirements for greenhouse gas emission reductions resulting from the... More ≫

Description

This protocol provides general requirements for measurement, monitoring, verification, and greenhouse gas quantification requirements for greenhouse gas emission reductions resulting from the conversion of diesel-generated electricity to high-line electricity powered drilling rigs.

Tags

Quantification protocol for solution gas conservation. Version 1.0

Description

This quantification is written for the solution gas conservation system operator or a solution gas conservation project developer. Familiarity with and general understanding of the operation of a... More ≫

Description

This quantification is written for the solution gas conservation system operator or a solution gas conservation project developer. Familiarity with and general understanding of the operation of a solution gas conservation facility is required.

Tags

Technical guidance for completing specified gas compliance reports. Version 4.0

Description

The purpose of this document is to assist facilities regulated under the Specified Gas Emitters Regulation in completing annual compliance reports. It also provides information on the compliance... More ≫

Description

The purpose of this document is to assist facilities regulated under the Specified Gas Emitters Regulation in completing annual compliance reports. It also provides information on the compliance options available for facilities that are not able to meet their emissions reduction target through facility level improvements.

Tags

Technical guidance for offset protocol developers. Version 1.0

Description

The purpose of this document is to assist offset market participants (protocol developers) wishing to develop quantification protocols for use in the Alberta offset system where the intended final... More ≫

Description

The purpose of this document is to assist offset market participants (protocol developers) wishing to develop quantification protocols for use in the Alberta offset system where the intended final purchaser of offset credits generated is a facility regulated under the Specified Gas Emitters Regulation. Alberta's offset market was initiated as a market instrument to support compliance under the Specified Gas Emitters Regulation. The Regulation requires all large, industrial facilities in Alberta emitting over 100,000 tonnes of carbon dioxide equivalent per year to reduce their emissions intensity by 12 per cent per year from their government approved baseline emission intensity.

Tags

Technical guidance for offset project developers. Version 2.0

Description

The purpose of this document is to assist offset market participants in implementing offset projects for use in the Alberta offset system where the intended final purchaser is a facility regulated... More ≫

Description

The purpose of this document is to assist offset market participants in implementing offset projects for use in the Alberta offset system where the intended final purchaser is a facility regulated under the Specified Gas Emitters Regulation.

Tags

Quantification protocol for energy efficiency in commercial and institutional buildings. Version 1.0

Description

This document establishes approved methodology for quantifying greenhouse gas emission reductions from energy efficiency measures implemented in commercial and institutional buildings. This... More ≫

Description

This document establishes approved methodology for quantifying greenhouse gas emission reductions from energy efficiency measures implemented in commercial and institutional buildings. This quantification protocol can be used by project developers to quantify greenhouse gas emission reductions resulting from the implementation of energy conservation measures resulting from changes in management practices and/or actual building improvements in new and retrofit projects. Emissions reductions are calculated as a difference in energy use in the project condition compared to the baseline. New builds are required to establish a baseline based on applicable building codes and a project condition that incorporates changes beyond these minimum standards. Retrofit projects are required to establish a baseline based on a greater of one full calendar year or one full operating cycle of data for actual building operations. Any changes in baseline conditions such as weather or building occupancy...

Tags